{"title":"Robotics","description":"","products":[{"product_id":"tipper-trailer-add-on-for-move-mini-mk2","title":"Kitronik Tipper Trailer Add On For :MOVE mini Mk2","description":"\u003cdiv id=\"product_tabs_description_tabbed_contents\"\u003e\n\u003cdiv class=\"std\"\u003e\n\u003cp\u003e\u003cstrong\u003eWith this, the latest version of our Tipper Truck add-on for \u003ca href=\"https:\/\/smalldevices.com.au\/collections\/kitronik-ltd\/products\/move-mini-mk2-buggy-kit-excl-micro-bit\" title=\"Kitronik MOVE mini buggy MK2 in Australia from Smalldevices\"\u003e:MOVE mini MK2 for the BBC microbit\u003c\/a\u003e, everyone's favourite little programmable robot buggy just got much better. Robots often do more than just :MOVE from A to B, and with this add-on so can :MOVE mini.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eAlthough this add on has been designed to work with :MOVE mini MK2 it can also be fitted to the original :MOVE mini. We have produced two sets of build instructions as there is a slightly different procedure for each. The MK1 and MK2 build instructions can both be found in the resources section below.\u003c\/p\u003e\n\u003cp\u003ePreviously on :MOVE mini, we; drew shapes, controlled it via bluetooth, controlled it with a second \u003ca href=\"https:\/\/smalldevices.com.au\/collections\/micro-bit-foundation\/products\/micro-bit\" title=\"BBC micro:bit in Australia from Smalldevices\"\u003emicrobit\u003c\/a\u003e, and we also coded a variety of light shows. Now, it can totally carry and dump stuff too!\u003c\/p\u003e\n\u003cp\u003eThis self assembly Tipper Truck add-on kit is made from the same materials as :MOVE mini, designed in keeping with the :MOVE mini aesthetic, and also comes with the servo required to move the Tipper Truck trailer up and down.\u003c\/p\u003e\n\u003cp\u003eThere is a very simple \u003ca href=\"https:\/\/smalldevices.com.au\/collections\/kitronik-ltd\/products\/kitronik-servo-lite-board-for-the-bbc-micro-bit\" title=\"Kitronik servo lite in Australia from Smalldevices\"\u003eServo:Lite\u003c\/a\u003e board hack that enables the control of the third servo, you can \u003ca href=\"https:\/\/www.kitronik.co.uk\/blog\/3-servos-with-the-servolite-board\/\"\u003efind out how here\u003c\/a\u003e. Once the kit is fully assembled, the Tipper Truck can be coded with the Microsoft \u003ca href=\"https:\/\/www.kitronik.co.uk\/blog\/getting-started-microsoft-makecode-editor\/\"\u003eMakeCode Editor\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNote: In order to use this accessory you must enable the third servo functionality to be able to connect the third servo to the Servo:Lite board, some soldering is required in order to do this. The header pins required for this are supplied with this kit. Also, enabling the third servo disables the onboard ZIP LEDs. If you undo the third servo hack and return the board to its original state, the onboard ZIP LEDs will be re-enabled. Kitronik have produced a short guide showing how to enable the third servo and how to revert this change, \u003ca href=\"https:\/\/www.kitronik.co.uk\/blog\/3-servos-with-the-servolite-board\/\"\u003eread it here\u003c\/a\u003e.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThis kit requires mechanical assembly.\u003c\/li\u003e\n\u003cli\u003eThis kit requires some soldering.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eWhen attached to :MOVE mini MK2 this kit offers a fun introduction to the world of DIY robotics.\u003c\/li\u003e\n\u003cli\u003eCode it with the Microsoft \u003ca href=\"https:\/\/makecode.microbit.org\/\"\u003eMakeCode Editor\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003eUse in conjunction with an App and control it over Bluetooth.\u003c\/li\u003e\n\u003cli\u003eUse the radio function and a second microbit as a controller.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eContents:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e1 x Set of Tipper Truck parts.\u003c\/li\u003e\n\u003cli\u003e1 x \u003ca href=\"https:\/\/smalldevices.com.au\/products\/mini-180-degree-servo-with-accessories\" title=\"mini 180 degree servo in Australia from Smalldevices\"\u003eMini 180 Degree Servo\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003e8 x M2 6mm Pan head steel screw.\u003c\/li\u003e\n\u003cli\u003e5 x M2 16mm Pan head steel screw.\u003c\/li\u003e\n\u003cli\u003e8 x M2 Hex Full width nut.\u003c\/li\u003e\n\u003cli\u003e2 x 6mm Counter sunk M3 screw.\u003c\/li\u003e\n\u003cli\u003e2 x 10mm Counter sunk M3 screw.\u003c\/li\u003e\n\u003cli\u003e2 x M3 Washers.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eDimensions:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eLength: 100mm.\u003c\/li\u003e\n\u003cli\u003eWidth: 65mm.\u003c\/li\u003e\n\u003cli\u003eHeight: 61mm.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eVideo:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cdiv class=\"youtube video-container\" style=\"text-align: center;\"\u003e\u003ciframe allow=\"accelerometer; autoplay; encrypted-media; gyroscope; picture-in-picture\" allowfullscreen=\"\" frameborder=\"0\" height=\"270\" src=\"https:\/\/www.youtube.com\/embed\/rdJOuXcmkik\" width=\"480\"\u003e\u003c\/iframe\u003e\u003c\/div\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eRequires:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e1 x \u003ca href=\"https:\/\/smalldevices.com.au\/products\/move-mini-mk2-buggy-kit-excl-micro-bit\" title=\"Kitronik :MOVE mini buggy MK2 in Australia from Smalldevices\"\u003e:MOVE mini MK2 (or MK1)for the BBC microbit kit\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003e1 x \u003ca href=\"https:\/\/smalldevices.com.au\/collections\/micro-bit-foundation\/products\/micro-bit\" title=\"BBC microbit in Australia\"\u003eBBC microbit\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003eScrewdriver.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eResources:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/www.kitronik.co.uk\/pdf\/tipper-truck-add-on-move-mini-instructions-mk1.pdf\" title=\"tipper trailer build instructions mk1\"\u003eTipper Build Instructions for MK1 :MOVE mini\u003c\/a\u003e.\u003cimg alt=\"pdf_icon.gif\" height=\"24\" src=\"https:\/\/www.kitronik.co.uk\/pdf\/pdf_icon.gif\" style=\"vertical-align: middle;\" width=\"25\"\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/www.kitronik.co.uk\/pdf\/5670-tipper-truck-add-on-move-mini-instructions-mk2.pdf\" title=\"tipper trailer build instructions mk2\"\u003eTipper Build Instructions for MK2 :MOVE mini\u003c\/a\u003e.\u003cimg alt=\"pdf_icon.gif\" height=\"24\" src=\"https:\/\/www.kitronik.co.uk\/pdf\/pdf_icon.gif\" style=\"vertical-align: middle;\" width=\"25\"\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/www.kitronik.co.uk\/pdf\/5623-servo-lite-datasheet.pdf%20\" title=\"servo:lite Datasheet\"\u003eServo:Lite board Datasheet\u003c\/a\u003e.\u003cimg alt=\"pdf_icon.gif\" height=\"24\" src=\"https:\/\/www.kitronik.co.uk\/pdf\/pdf_icon.gif\" style=\"vertical-align: middle;\" width=\"25\"\u003e\n\u003c\/li\u003e\n\u003cli\u003eCoding Examples;\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/www.kitronik.co.uk\/zip\/microbit-tipper-and-bulldozer-example-code-using-microbit-radio.zip\"\u003eExample code and usage instructions\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/www.kitronik.co.uk\/blog\/kitronik-custom-makecode-editor-servo-blocks\/\"\u003eGuide For Kitronik Custom MakeCode Editor Servo Blocks\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/www.kitronik.co.uk\/blog\/getting-started-servolite-board-microbit\/\"\u003eGetting Started With The Servo:Lite board\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/www.kitronik.co.uk\/blog\/3-servos-with-the-servolite-board\/\"\u003eGuide For Controlling 3 Servos With The Servo:Lite board\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/www.kitronik.co.uk\/blog\/move-mini-microbit-radio\/\"\u003eGuide for Controlling :MOVE mini With The microbit Radio\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/www.kitronik.co.uk\/blog\/adding-bluetooth-remote-control-move-mini\/\"\u003eGuide For Adding Bluetooth Remote Control To :MOVE mini\u003c\/a\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"Kitronik Ltd","offers":[{"title":"Default Title","offer_id":32901758484612,"sku":"KT-5670","price":27.15,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0368\/0337\/9332\/products\/5670_additional-2-tipper-trailer-add-on-move-mini-robot-buggy-microbit.jpg?v=1584962467"},{"product_id":"bulldozer-add-on-for-move-mini-mk2","title":"Kitronik BullDozer add on for :MOVE mini Mk2","description":"\u003cdiv id=\"product_tabs_description_tabbed_contents\"\u003e\n\u003cdiv class=\"std\"\u003e\n\u003cp\u003e\u003cstrong\u003eWith this, the latest version of our Bulldozer add-on for \u003ca href=\"https:\/\/smalldevices.com.au\/collections\/kitronik-ltd\/products\/move-mini-mk2-buggy-kit-excl-micro-bit\" title=\"Kitronik :MOVE mini mk2 in Australia from Smalldevices\"\u003e:MOVE mini MK2 for the BBC microbit\u003c\/a\u003e, everyone's favourite little programmable robot buggy just got much better. Robots often do more than just :MOVE from A to B, and with this add-on so can :MOVE mini.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eAlthough this add on has been designed to work with :MOVE mini MK2\u003cem\u003e it can also be fitted to the original :MOVE mini\u003c\/em\u003e. We have produced two sets of build instructions as there is a slightly different procedure for each. The MK1 and MK2 build instructions can both be found in the resources section below.\u003c\/p\u003e\n\u003cp\u003ePreviously on :MOVE mini, we; drew shapes, controlled it via bluetooth, controlled it with a second \u003ca href=\"https:\/\/smalldevices.com.au\/collections\/micro-bit-starters\/products\/micro-bit\" title=\"BBC microbit in Australia from Smalldevices\"\u003emicrobit\u003c\/a\u003e, and we also coded a variety of light shows. Now, it can totally lift and carry stuff too!\u003c\/p\u003e\n\u003cp\u003eThis self assembly bulldozer add-on kit is made from the same materials as :MOVE mini MK2, designed in keeping with the :MOVE mini aesthetic, and also comes with the servo required to move the bulldozer add-on up and down.\u003c\/p\u003e\n\u003cp\u003eThere is a very simple \u003ca href=\"https:\/\/smalldevices.com.au\/collections\/kitronik-ltd\/products\/kitronik-servo-lite-board-for-the-bbc-micro-bit\" title=\"Kitronik servo lite board for the microbit in Australia from Smalldevices\"\u003eServo:Lite\u003c\/a\u003e board hack that enables the control of the third servo, you can \u003ca href=\"https:\/\/www.kitronik.co.uk\/blog\/3-servos-with-the-servolite-board\/\"\u003efind out how here\u003c\/a\u003e. Once the kit is fully assembled, the bulldozer arm can be coded with the Microsoft \u003ca href=\"https:\/\/www.kitronik.co.uk\/blog\/getting-started-microsoft-makecode-editor\/\"\u003eMakeCode Editor\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNote: In order to use this accessory you must enable the third servo functionality to be able to connect the third servo to the Servo:Lite board, some soldering is required in order to do this. The header pins required for this are supplied with this kit. Also, enabling the third servo disables the onboard ZIP LEDs. If you undo the third servo hack and return the board to its original state, the onboard ZIP LEDs will be re-enabled. Kitronik have produced a short guide showing how to enable the third servo and how to revert this change, \u003ca href=\"https:\/\/www.kitronik.co.uk\/blog\/3-servos-with-the-servolite-board\/\"\u003eread it here\u003c\/a\u003e.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThis kit requires mechanical assembly.\u003c\/li\u003e\n\u003cli\u003eThis kit requires some soldering.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eWhen attached to :MOVE mini this kit offers a fun introduction to the world of DIY robotics.\u003c\/li\u003e\n\u003cli\u003eCode it with the Microsoft \u003ca href=\"https:\/\/makecode.microbit.org\/\"\u003eMakeCode Editor\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003eUse in conjunction with an App and control it over Bluetooth.\u003c\/li\u003e\n\u003cli\u003eUse the radio function and a second microbit as a controller.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eContents:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e1 x Set of Buldozer parts.\u003c\/li\u003e\n\u003cli\u003e1 x \u003ca href=\"https:\/\/smalldevices.com.au\/products\/mini-180-degree-servo-with-accessories\" title=\"mini 180 degree servo in Australia from Smalldevices\"\u003eMini 180 Degree Servo\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003e4 x M2 6mm Pan head steel screw.\u003c\/li\u003e\n\u003cli\u003e4 x M2 Hex Full width nut.\u003c\/li\u003e\n\u003cli\u003e2 x Counter sunk M3 screw.\u003c\/li\u003e\n\u003cli\u003e3 x Straight PCB pin headers.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eDimensions:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eLength: 110mm.\u003c\/li\u003e\n\u003cli\u003eWidth: 50mm.\u003c\/li\u003e\n\u003cli\u003eHeight: 75mm.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eVideo:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cdiv class=\"youtube video-container\" style=\"text-align: center;\"\u003e\u003ciframe allow=\"accelerometer; autoplay; encrypted-media; gyroscope; picture-in-picture\" allowfullscreen=\"\" frameborder=\"0\" height=\"270\" src=\"https:\/\/www.youtube.com\/embed\/rdJOuXcmkik\" width=\"480\"\u003e\u003c\/iframe\u003e\u003c\/div\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eRequires:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e1 x \u003ca href=\"https:\/\/smalldevices.com.au\/collections\/kitronik-ltd\/products\/move-mini-mk2-buggy-kit-excl-micro-bit\" title=\"Kitronik :MOVE mini MK2 for the BBC microbit in Australia from Smalldevices\"\u003e:MOVE mini MK2 (or MK1) for the BBC microbit kit\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003e1 x \u003ca href=\"https:\/\/smalldevices.com.au\/collections\/micro-bit-starters\/products\/micro-bit\"\u003eBBC microbit.\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eScrewdriver.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eResources:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/www.kitronik.co.uk\/pdf\/bulldozer-build-instructions-mk1.pdf\" title=\"5671 bulldozer move mini add on build instructions MK1\"\u003eBulldozer Build Instructions for MK1 :MOVE mini\u003c\/a\u003e.\u003cimg alt=\"pdf_icon.gif\" height=\"24\" src=\"https:\/\/www.kitronik.co.uk\/pdf\/pdf_icon.gif\" style=\"vertical-align: middle;\" width=\"25\"\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/www.kitronik.co.uk\/pdf\/5671-buldozer-build%20instructions-move-mini-mk2.pdf\" title=\"5671 bulldozer move mini add on build instructions MK2\"\u003eBulldozer Build Instructions for MK2 :MOVE mini\u003c\/a\u003e.\u003cimg alt=\"pdf_icon.gif\" height=\"24\" src=\"https:\/\/www.kitronik.co.uk\/pdf\/pdf_icon.gif\" style=\"vertical-align: middle;\" width=\"25\"\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/www.kitronik.co.uk\/pdf\/5623-servo-lite-datasheet.pdf%20\" title=\"servo:lite Datasheet\"\u003eServo:Lite board Datasheet\u003c\/a\u003e.\u003cimg alt=\"pdf_icon.gif\" height=\"24\" src=\"https:\/\/www.kitronik.co.uk\/pdf\/pdf_icon.gif\" style=\"vertical-align: middle;\" width=\"25\"\u003e\n\u003c\/li\u003e\n\u003cli\u003eCoding Examples;\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/www.kitronik.co.uk\/zip\/microbit-tipper-and-bulldozer-example-code-using-microbit-radio.zip\"\u003eExample code and usage instructions\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/www.kitronik.co.uk\/blog\/kitronik-custom-makecode-editor-servo-blocks\/\"\u003eGuide For Kitronik Custom MakeCode Editor Servo Blocks\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/www.kitronik.co.uk\/blog\/getting-started-servolite-board-microbit\/\"\u003eGetting Started With The Servo:Lite board\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/www.kitronik.co.uk\/blog\/3-servos-with-the-servolite-board\/\"\u003eGuide For Controlling 3 Servos With The Servo:Lite board\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/www.kitronik.co.uk\/blog\/move-mini-microbit-radio\/\"\u003eGuide for Controlling :MOVE mini With The microbit Radio\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/www.kitronik.co.uk\/blog\/adding-bluetooth-remote-control-move-mini\/\"\u003eGuide For Adding Bluetooth Remote Control To :MOVE mini\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/www.kitronik.co.uk\/pdf\/WS2812B-LED-datasheet.pdf%20\" title=\"WS2812B Datasheet\"\u003eWS2812B Datasheet\u003c\/a\u003e.\u003cimg alt=\"pdf_icon.gif\" height=\"24\" src=\"https:\/\/www.kitronik.co.uk\/pdf\/pdf_icon.gif\" style=\"vertical-align: middle;\" width=\"25\"\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"Kitronik Ltd","offers":[{"title":"Default Title","offer_id":32901758845060,"sku":"KT-5671","price":18.6,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0368\/0337\/9332\/products\/5671_additional-2-bull-dozer-add-on-move-mini-robot-buggy-microbit.jpg?v=1584962470"},{"product_id":"4tronix-pen-holder-mk2-for-bitbot","title":"4tronix Pen Holder Mk2 for BitBot","description":"\u003cmeta charset=\"utf-8\"\u003e\n\u003cp\u003e\u003cstrong\u003ePen Holder Mk2 for Bit:Bot\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e* \u003cstrong\u003eBit:Bot not included\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis updated pen holder for the \u003ca href=\"https:\/\/smalldevices.com.au\/collections\/4tronix\/products\/bit-bot\" title=\"4Tronix BitBot robot for the microbit\"\u003eBit:Bot\u003c\/a\u003e is easier to use, and more robust, than Mk1. Instead of a rubber grommet, the new design has a 2-part construction that the pen simply drops into and uses gravity to give the required downforce.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThis is designed for a Sharpie felt tip pen, but other pens of approx. 10-11mm diameter can of course be used.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eComprises:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eBottom plate\u003c\/li\u003e\n\u003cli\u003eTop plate\u003c\/li\u003e\n\u003cli\u003e2 x 11mm pillars\u003c\/li\u003e\n\u003cli\u003e4 x 6mm screws\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eSimply screw the two plates together using the screws and pillars provided.\u003c\/p\u003e","brand":"4Tronix","offers":[{"title":"Default Title","offer_id":32901759172740,"sku":"4T_BITPEN2","price":5.95,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0368\/0337\/9332\/products\/IMG_2961a_1024x1024_8455f8f8-9223-4114-b3c2-e037deed64f6.jpg?v=1584962475"},{"product_id":"klip-motor-driver-for-bbc-micro-bit","title":"Kitronik Klip Motor Driver for BBC micro:bit","description":"\u003cdiv id=\"product_tabs_description_tabbed_contents\"\u003e\n\u003cdiv class=\"std\"\u003e\n\u003cp\u003e\u003cstrong\u003eThe Klip Motor Driver for the BBC micro:bit does much more than just drive motors. It also breaks out pins 0, 1, 2, 3V and GDN (just like the main pads on the BBC micro:bit itself), and theres a ZIP LED output as well, along with the battery voltage and another GND connection. All of these pads are designed specifically for use with crocodile clips and banana plugs. That means no soldering or fiddling with connection blocks. Also, the pads have been designed and spaced to make it difficult to short two together with crocodile clips. This makes it ideal for use with younger children who can build buggies with little more than a couple of motors, a chassis, some elastic bands and the clip motor driver..\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIt can run two \u003ca href=\"https:\/\/smalldevices.com.au\/search?q=dc+motor\" title=\"DC motors\"\u003eDC motors\u003c\/a\u003e simultaneously, both clockwise and counter-clockwise, and at varying speeds. Some examples of motors to use would be right angled geared hobby motors and solderless gearmotors. The ZIP LED output connection is ideally suited for use with the ZIP Hex boards, as they also have croc-clip connections.\u003c\/p\u003e\n\u003cp\u003eThe main BBC micro:bit pin breakout section is great for controlling the Kitronik :CITY products, such as:\u003c\/p\u003e\n\u003cul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/smalldevices.com.au\/collections\/kitronik-ltd\/products\/stop-bit-traffic-light-for-bbc-micro-bit\" title=\"Kitronik STOP:bit traffic lights for the BBC micro:bit\"\u003eSTOP:bit\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/smalldevices.com.au\/products\/kitronik-lamp-bit-for-the-bbc-micro-bit\" title=\"Kitronik LAMP:bit for the BBC micro:bit\"\u003eLAMP:bit\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/smalldevices.com.au\/products\/access-bit-for-bbc-micro-bit\" title=\"Kitronik ACCESS:Bit for the BBC micro:bit\"\u003eACCESS:bit\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe board also features status LEDs. There are LEDs for board powered on, pins 0, 1, 2, 3 and also the two motor outputs. The motor indicator LEDs don't just monitor activity, they also indicate which direction each motor is running in, green for forwards and red for backwards. These LEDs don't just look nice, they are a great way of visually troubleshooting your code and they even allow you test your code without having to connect motors or devices to pins 0, 1, 2, 3.\u003c\/p\u003e\n\u003cp\u003ePower is provided via the integrated battery supply (3 x AA, 4.5V), and the board then produces a regulated 3.3V supply which is fed into the 3V and GND connections to power the connected BBC micro:bit, removing the need to power the BBC micro:bit separately.\u003c\/p\u003e\n\u003cp\u003eKitronik have produced a set of custom blocks for the MakeCode editor to simplify using the Klip Motor Driver. To add them to the editor, select the cog icon in the top right of the editor. Then, select Extensions from the drop down menu and in the search bar type and enter Kitronik. Pick the tile from the list and the new blocks will be added to the menu in the editor. We've also included blocks within this package for driving any ZIP LEDs you attach to the board. These are primarily for allowing younger children to write code using blocks that are easier to use other coding blocks for addressable LEDs.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIf the BBC micro:bit is powered via its USB connector, and there are no batteries inserted, there will be no power at the 3V output connection this is to provide some overcurrent protection for the BBC micro:bit.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/smalldevices.com.au\/search?q=dc+motor\" title=\"DC motors available in Australia\"\u003eDrive 2 x DC Motors\u003c\/a\u003e simultaneously, both clockwise and counter-clockwise.\u003c\/li\u003e\n\u003cli\u003eIt breaks out Pins 0, 1, 2, 3V and GDN (just like the main pads on the BBC micro:bit itself).\u003c\/li\u003e\n\u003cli\u003eConnect to the pads with crocodile clips and banana plugs.\u003c\/li\u003e\n\u003cli\u003eThere is also an out put design specifically for ZIP LEDs.\u003c\/li\u003e\n\u003cli\u003eThe main BBC micro:bit pin breakout section is great for controlling the Kitronik :CITY products.\u003c\/li\u003e\n\u003cli\u003ePower is provided via the integrated battery supply.\u003c\/li\u003e\n\u003cli\u003eOutput and motor driver status lights for troubleshooting and testing code prior to attaching motors and devices.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eContents:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e1 x Klip Motor Driver for the BBC micro:bit.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eDimensions:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eLength: 72mm.\u003c\/li\u003e\n\u003cli\u003eWidth: 70mm.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eRequires:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/smalldevices.com.au\/collections\/micro-bit-starters\/products\/micro-bit\" title=\"BBC micro:bit\"\u003eBBC micro:bit\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/smalldevices.com.au\/products\/alligator-clip-leads\" title=\"Alligator clips Crocodile clips\"\u003eCrocodile Clips\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e3 x AA Batteries\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eResources:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/www.kitronik.co.uk\/pdf\/5655-klip-motor-user-guide.pdf\" title=\"Klip User Guide PDF\"\u003eKlip User Guide\u003c\/a\u003e.\u003cimg alt=\"pdf_icon.gif\" height=\"24\" src=\"https:\/\/www.kitronik.co.uk\/pdf\/pdf_icon.gif\" style=\"vertical-align: middle;\" width=\"25\"\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/www.kitronik.co.uk\/pdf\/5655-klip-motor-microbit-datasheet.pdf\" title=\"Klip Datasheet PDF\"\u003eDatasheet\u003c\/a\u003e.\u003cimg alt=\"pdf_icon.gif\" height=\"24\" src=\"https:\/\/www.kitronik.co.uk\/pdf\/pdf_icon.gif\" style=\"vertical-align: middle;\" width=\"25\"\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/github.com\/KitronikLtd\/pxt-kitronik-klip-motor\"\u003eKlip MakeCode Extension on GitHub\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/github.com\/KitronikLtd\/micropython-microbit-kitronik-klip-motor\"\u003eMicroPython Code example\u003c\/a\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"Kitronik Ltd","offers":[{"title":"Default Title","offer_id":32901761400964,"sku":"KT-5655","price":26.75,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0368\/0337\/9332\/products\/5655_additional-klip-clipable-motor-driver-board-microbit-back.jpg?v=1584962490"},{"product_id":"move-mini-bumper-add-on-v2","title":"Kitronik :MOVE mini Bumper Add on V2","description":"\u003cdiv id=\"product_tabs_description_tabbed_contents\"\u003e\n\u003cdiv class=\"std\"\u003e\n\u003cp\u003e\u003cstrong\u003eWith this Bumper add-on for :MOVE mini for the BBC microbit MK2, everyone's favorite little programmable robot buggy just got much better. If you were looking for an add-on that allows for competitive games, then this is the add-on for you.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis version of the bumper add on has been designed to fit both the new \u003ca href=\"https:\/\/smalldevices.com.au\/products\/move-mini-mk2-buggy-kit-excl-micro-bit\" title=\"Kitronik :MOVE mini buggy MK2 with grippy wheels\"\u003e:MOVE mini MK2\u003c\/a\u003e and \u003ca href=\"https:\/\/smalldevices.com.au\/products\/kitronik-move-mini-buggy-kit-for-bbc-micro-bit\"\u003ethe original version\u003c\/a\u003e. The assembly instructions for both can be found in the Resources section below.\u003c\/p\u003e\n\u003cp\u003eThis self assembly Bumper add-on kit is made from the same materials as the \u003ca href=\"https:\/\/smalldevices.com.au\/products\/move-mini-mk2-buggy-kit-excl-micro-bit\" title=\"Kitronik :MOVE mini buggy mkII\"\u003e:MOVE mini MK2\u003c\/a\u003e and has been designed in keeping with the :MOVE mini aesthetic.\u003c\/p\u003e\n\u003cp\u003eOnce the add-on has been attached to :MOVE mini MK2, the buggy can now easily be used for competitive games involving a ball or a puck, soccer and hockey spring to mind.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThis kit requires mechanical assembly.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThis attachment can be fitted quickly and easily.\u003c\/li\u003e\n\u003cli\u003e:MOVE mini MK2 will be able to move balls and pucks.\u003c\/li\u003e\n\u003cli\u003eAllows for competitive team games such as football and hockey.\u003c\/li\u003e\n\u003cli\u003eThis product is backwards compatible with \u003ca href=\"https:\/\/smalldevices.com.au\/products\/kitronik-move-mini-buggy-kit-for-bbc-micro-bit\"\u003ethe first version of :MOVE mini\u003c\/a\u003e. There are two sets of assembly instructions in the resources section below.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eContents:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e1 x Set of Bumper parts.\u003c\/li\u003e\n\u003cli\u003e2 x 10mm Counter sunk M3 screw.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eRequires:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e1 x :MOVE mini for the BBC microbit kit.\u003c\/li\u003e\n\u003cli\u003e1 x \u003ca href=\"https:\/\/smalldevices.com.au\/collections\/micro-bit-starters\/products\/micro-bit\" title=\"BBC micro:bit\"\u003eBBC microbit\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003eScrewdriver.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eResources:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/www.kitronik.co.uk\/pdf\/5658-v2-bumper-move-mini-microbit-mk1.pdf\" title=\"Build Instructions mk1\"\u003eBuild Instructions For MK1 :MOVE mini\u003c\/a\u003e.\u003cimg alt=\"pdf_icon.gif\" height=\"24\" src=\"https:\/\/www.kitronik.co.uk\/pdf\/pdf_icon.gif\" style=\"vertical-align: middle;\" width=\"25\"\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/www.kitronik.co.uk\/pdf\/5658-v2-bumper-move-mini-microbit-mk2.pdf\" title=\"Build Instructions mk2\"\u003eBuild Instructions For MK2 :MOVE mini\u003c\/a\u003e.\u003cimg alt=\"pdf_icon.gif\" height=\"24\" src=\"https:\/\/www.kitronik.co.uk\/pdf\/pdf_icon.gif\" style=\"vertical-align: middle;\" width=\"25\"\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/www.kitronik.co.uk\/blog\/kitronik-custom-makecode-editor-servo-blocks\/\"\u003eGuide For Kitronik Custom MakeCode Editor Servo Blocks\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/www.kitronik.co.uk\/blog\/getting-started-servolite-board-microbit\/\"\u003eGetting Started With The Servo:Lite board\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/www.kitronik.co.uk\/blog\/3-servos-with-the-servolite-board\/\"\u003eGuide For Controlling 3 Servos With The Servo:Lite board\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/www.kitronik.co.uk\/blog\/using-kitronik-zip-leds-bbc-microbit\/\"\u003eGuide For Using Kitronik ZIP LEDs With The BBC microbit\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/www.kitronik.co.uk\/blog\/move-mini-microbit-radio\/\"\u003eGuide for Controlling :MOVE mini With The microbit Radio\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/www.kitronik.co.uk\/blog\/adding-bluetooth-remote-control-move-mini\/\"\u003eGuide For Adding Bluetooth Remote Control To :MOVE mini\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/www.kitronik.co.uk\/blog\/drawing-move-mini-buggy\/\"\u003eGuide For Drawing With The :MOVE mini For The microbit\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/www.kitronik.co.uk\/blog\/automatic-headlights-for-move-mini\/\"\u003eGuide For Coding Automatic Headlights For :MOVE mini\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/www.kitronik.co.uk\/blog\/coding-indicators-on-the-move-mini\/\"\u003eGuide For Coding Indicators For :MOVE mini\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/www.kitronik.co.uk\/pdf\/WS2812B-LED-datasheet.pdf%20\" title=\"WS2812B Datasheet\"\u003eWS2812B Datasheet\u003c\/a\u003e.\u003cimg alt=\"pdf_icon.gif\" height=\"24\" src=\"https:\/\/www.kitronik.co.uk\/pdf\/pdf_icon.gif\" style=\"vertical-align: middle;\" width=\"25\"\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/www.kitronik.co.uk\/pdf\/5623-servo-lite-datasheet.pdf%20\" title=\"servo:lite Datasheet\"\u003eServo:Lite board Datasheet\u003c\/a\u003e.\u003cimg alt=\"pdf_icon.gif\" height=\"24\" src=\"https:\/\/www.kitronik.co.uk\/pdf\/pdf_icon.gif\" style=\"vertical-align: middle;\" width=\"25\"\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"Kitronik Ltd","offers":[{"title":"Default Title","offer_id":32901762875524,"sku":"KT-5658","price":3.65,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0368\/0337\/9332\/products\/5658_additional-bumper-add-on-move-mini-mk2-microbit-parts.jpg?v=1584962502"},{"product_id":"move-mini-mk2-buggy-kit-excl-micro-bit","title":"Kitronik :MOVE mini MK2 buggy kit (excl micro:bit)","description":"\u003cdiv id=\"product_tabs_description_tabbed_contents\"\u003e\n\u003cdiv class=\"std\"\u003e\n\u003cp\u003e\u003cstrong\u003eThe Kitronik :MOVE mini MK 2 buggy kit for the BBC micro:bit is the latest version of our ever popular \u003ca href=\"https:\/\/smalldevices.com.au\/products\/kitronik-move-mini-buggy-kit-for-bbc-micro-bit\"\u003e:MOVE mini\u003c\/a\u003e that provides a fun introduction to robotics. The :MOVE mini is a 2 wheeled robot that is suitable forautonomous operation, remote control projects via a Bluetooth application or being controlled using a second BBC microbit as a controller via the microbits radio functionality.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe MK2 features a brand new set of Kitronik injection moulded wheels with 0-ring rubber tyres. The wheels maintain the large size, relative to the chassis, and add improved traction for better performance than the original buggies laser cut wheels. MK2 goes where \u003ca href=\"https:\/\/smalldevices.com.au\/products\/kitronik-move-mini-buggy-kit-for-bbc-micro-bit\"\u003eV1.0\u003c\/a\u003e could not!\u003c\/p\u003e\n\u003cp\u003eThe Kitronik :MOVE mini is powered by two continuous rotation servo motors. The speed of these servos can be controlled by simply altering the PWM (Pulse Width Modulation) signal to the servo, which is easy to do using the Servo blocks in the Microsoft PXT Block editor. We have also produced Kitronik custom blocks for the Servo:Lite to make the task of coding as quick and painless as possible, see the resources section at the foot of this page for more information.\u003c\/p\u003e\n\u003cp\u003eThe buggy also has 5 x RGB individually addressable \u003ca href=\"https:\/\/smalldevices.com.au\/search?q=zip+led\" title=\"RGB LEDs ZIP LEDs\"\u003eZIP LEDs \u003c\/a\u003e(NeoPixel compatible), which can be used as indicators, reverse lights etc...\u003c\/p\u003e\n\u003cp\u003eIt is possible to add a pen or other extra parts to the kit to increase the range of tasks for which it can be used. \u003cstrong\u003eThe BBC micro:bit is sold separately and the kit requires simple assembly, buy the microbit here.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe included Kitronik :MOVE \u003ca href=\"https:\/\/smalldevices.com.au\/collections\/micro-bit-accessories\/products\/kitronik-servo-lite-board-for-the-bbc-micro-bit\" title=\"Kitronik Servo:Lite board for the BBC micro:bit\"\u003eservo:lite board\u003c\/a\u003e can also be used in conjunction with a BBC micro:bit to build other movement based projects. We've produced a wide range of tutorials and guides that can be found in the resources section below. We have guides detailing; how to control a third servo, how to code the buggy to draw shapes, how to write code for the on-board ZIP LEDs, how to code the buggy for Bluetooth control and how to use a second \u003ca href=\"https:\/\/smalldevices.com.au\/collections\/micro-bit-starters\/products\/micro-bit\" title=\"BBC microbit\"\u003emicrobit\u003c\/a\u003e as a controller.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eIt requires mechanical assembly.\u003c\/li\u003e\n\u003cli\u003eThis kit does not come with a microbit, you can buy \u003ca href=\"https:\/\/smalldevices.com.au\/collections\/micro-bit-starters\/products\/micro-bit\" title=\"BBC microbit supplier in Australia\"\u003ethe microbit here\u003c\/a\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThe kit offers a fun introduction to the world of DIY \u003ca href=\"https:\/\/smalldevices.com.au\/collections\/robotics\"\u003erobotics\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003eAdd code for autonomous operation.\u003c\/li\u003e\n\u003cli\u003eUse in conjunction with our free micro:bit Android App and control it over Bluetooth.\u003c\/li\u003e\n\u003cli\u003eUse the radio function and a second microbit as a controller.\u003c\/li\u003e\n\u003cli\u003eAttach a pen and code the robot to draw shapes.\u003c\/li\u003e\n\u003cli\u003eThe buggy features new and improved injection moulded wheels with rubber 0-ring tyres.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eContents:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e1 x Set of chassis parts.\u003c\/li\u003e\n\u003cli\u003e2 x \u003ca href=\"https:\/\/smalldevices.com.au\/products\/fs90r-360-degree-continuous-rotation-servo\" title=\"Micro 360 servo with accessories\"\u003eMicro 360 degree continuous rotation Servos with accessories\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003e1 x Servo:Lite board.\u003c\/li\u003e\n\u003cli\u003e2 x Counter sunk M3 6mm screw.\u003c\/li\u003e\n\u003cli\u003e5 x Counter sunk M3 8mm screw.\u003c\/li\u003e\n\u003cli\u003e6 x M2 Rec Pan Steel screw.\u003c\/li\u003e\n\u003cli\u003e6 x M2 Hex Full Width Nut.\u003c\/li\u003e\n\u003cli\u003e3 x AAA Batteries.\u003c\/li\u003e\n\u003cli\u003e1 x Pair of ABS White Wheels.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eDimensions:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eLength: 95mm.\u003c\/li\u003e\n\u003cli\u003eWidth: 85mm.\u003c\/li\u003e\n\u003cli\u003eHeight: 85mm.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eVideo:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cdiv class=\"youtube video-container\" style=\"text-align: center;\"\u003e\u003ciframe allow=\"accelerometer; autoplay; encrypted-media; gyroscope; picture-in-picture\" allowfullscreen=\"\" frameborder=\"0\" height=\"720\" src=\"https:\/\/www.youtube.com\/embed\/Jl1UhNH7a4I\" width=\"1280\"\u003e\u003c\/iframe\u003e\u003c\/div\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eResources:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/www.kitronik.co.uk\/pdf\/5652-web-move-mini-mk-2-microbit-build-instructions.pdf\" title=\"\"\u003eBuild Instructions\u003c\/a\u003e.\u003cimg alt=\"pdf_icon.gif\" height=\"24\" src=\"https:\/\/www.kitronik.co.uk\/pdf\/pdf_icon.gif\" style=\"vertical-align: middle;\" width=\"25\"\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/www.kitronik.co.uk\/pdf\/5623-servo-lite-datasheet.pdf\" title=\"servo:lite Datasheet\"\u003eServo:Lite board Datasheet\u003c\/a\u003e.\u003cimg alt=\"pdf_icon.gif\" height=\"24\" src=\"https:\/\/www.kitronik.co.uk\/pdf\/pdf_icon.gif\" style=\"vertical-align: middle;\" width=\"25\"\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/www.kitronik.co.uk\/pdf\/WS2812B-LED-datasheet.pdf%20\" title=\"WS2812B Datasheet\"\u003eWS2812B Datasheet\u003c\/a\u003e.\u003cimg alt=\"pdf_icon.gif\" height=\"24\" src=\"https:\/\/www.kitronik.co.uk\/pdf\/pdf_icon.gif\" style=\"vertical-align: middle;\" width=\"25\"\u003e\n\u003c\/li\u003e\n\u003cli\u003eCoding and usage guides:\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/www.kitronik.co.uk\/blog\/kitronik-custom-pxt-editor-servo-blocks\/\"\u003eGuide For Kitronik Custom PXT Editor Servo Blocks\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/www.kitronik.co.uk\/blog\/getting-started-servolite-board-microbit\/\"\u003eGetting Started With The Servo:Lite board\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/www.kitronik.co.uk\/blog\/3-servos-with-the-servolite-board\/\"\u003eGuide For Controlling 3 Servos With The Servo:Lite board\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/www.kitronik.co.uk\/blog\/using-kitronik-zip-leds-bbc-microbit\/\"\u003eGuide For Using Kitronik ZIP LEDs With The BBC microbit\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/www.kitronik.co.uk\/blog\/move-mini-microbit-radio\/\"\u003eGuide for Controlling :MOVE mini With The microbit Radio\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/www.kitronik.co.uk\/blog\/adding-bluetooth-remote-control-move-mini\/\"\u003eGuide For Adding Bluetooth Remote Control To :MOVE mini\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/www.kitronik.co.uk\/blog\/drawing-move-mini-buggy\/\"\u003eGuide For Drawing With The :MOVE mini For The microbit\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/www.kitronik.co.uk\/blog\/automatic-headlights-for-move-mini\/\"\u003eGuide For Coding Automatic Headlights For :MOVE mini\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/www.kitronik.co.uk\/blog\/coding-indicators-on-the-move-mini\/\"\u003eGuide For Coding Indicators For :MOVE mini\u003c\/a\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"Kitronik Ltd","offers":[{"title":"Default Title","offer_id":32901764644996,"sku":"KT-5652","price":56.55,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0368\/0337\/9332\/products\/5652_additional-move-mini-mk-2-microbit-built.jpg?v=1584962510"},{"product_id":"wemos-lolin-barometric-pressure-shield-v1-0-0-d1-mini-hp303b-i2c-module-dps310-compatible","title":"WEMOS LOLIN Barometric Pressure Shield V1.0.0 D1 mini HP303B I2C module (DPS310 compatible)","description":"\u003cmeta charset=\"utf-8\"\u003e\u003cmeta charset=\"utf-8\"\u003e\n\u003cp data-spm-anchor-id=\"a2g0s.12269583.0.i4.7d874d56woD4oW\"\u003e\u003cstrong\u003eThis I2C Barometric Pressure \u0026amp; Temperature shield is based around the HP303B digital sensor. You can access it via headers or using an I2C cable.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-spm-anchor-id=\"a2g0s.12269583.0.i4.7d874d56woD4oW\"\u003e \u003c\/p\u003e\n\u003cp data-spm-anchor-id=\"a2g0s.12269583.0.i4.7d874d56woD4oW\"\u003eFeatures:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003eI2C Interface\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003e\u003c\/span\u003e\u003cspan\u003eTwo user selectable addresses (0x77 or 0x76)\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\u003cspan data-spm-anchor-id=\"a2g0s.12269583.0.i5.7d874d56woD4oW\"\u003eOperation range: Pressure: 300 -1200 hPa. Temperature: -40 - 85 °C.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003ePressure sensor precision: ± 0.005 hPa (or ±0.05 m) (high precision mode).\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eRelative accuracy: ± 0.06 hPa (or ±0.5 m)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eAbsolute accuracy: ± 1 hPa (or ±8 m)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003eTemperature accuracy: ± 0.5°C.\u003c\/span\u003e\u003cspan\u003e\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eSeparable design\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eΦ2mm mounting holes\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe \u003ca href=\"https:\/\/smalldevices.com.au\/collections\/wemos\/products\/i2c-cable-100mm-10cm-for-lolin-wemos-sh1-0-4p-double-head-cable\"\u003e4p I2C cable\u003c\/a\u003e is not included and available seperately.\u003c\/p\u003e","brand":"Wemos","offers":[{"title":"Default Title","offer_id":32901779325060,"sku":"LOLIN_BAR","price":4.95,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0368\/0337\/9332\/products\/lolin_barometric_pressure.jpg?v=1584962595"},{"product_id":"wemos-lolin-pir-shield-v1-0-0-for-lolin-d1-mini-passive-infrared-sensor-module","title":"WEMOS LOLIN PIR Shield V1.0.0 for LOLIN D1 mini passive infrared sensor module","description":"\u003cmeta charset=\"utf-8\"\u003e\n\u003cp data-spm-anchor-id=\"a2g0s.12269583.0.i4.8ec829027sUnUL\"\u003eThis is a mini passive infrared sensor module for detecting movement.\u003c\/p\u003e\n\u003cp data-spm-anchor-id=\"a2g0s.12269583.0.i4.8ec829027sUnUL\"\u003eFeatures:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003eConfigurable IO (Default: D3\/GPIO0)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003e\u003c\/span\u003e\u003cspan\u003eΦ2mm mounting holes\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Wemos","offers":[{"title":"Default Title","offer_id":32901780537476,"sku":"LOLIN_INFRA_D1","price":5.35,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0368\/0337\/9332\/products\/lolin_pir.jpg?v=1584962602"},{"product_id":"wemos-sht30-shield-temperature-and-humidity-sensor","title":"WEMOS SHT30 Shield (temperature and humidity sensor)","description":"\u003cmeta charset=\"utf-8\"\u003e\n\u003cp\u003e\u003cstrong\u003eThis is an \u003c\/strong\u003e\u003cstrong\u003eI2C Interface digital temperature and humidity sensor shield based on the SHT30.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eFeatures include:\u003c\/span\u003e\u003c\/p\u003e\n\u003cul class=\" fix-media-list-overlap\"\u003e\n\u003cli class=\"level1\"\u003e\n\u003cdiv class=\"li\"\u003eI2C Interface\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli class=\"level1\"\u003e\n\u003cdiv class=\"li\"\u003eTwo user selectable addresses\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli class=\"level1\"\u003e\n\u003cdiv class=\"li\"\u003eTypical accuracy ±3%RH and ±0.3°C\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli class=\"level1\"\u003e\n\u003cdiv class=\"li\"\u003eSeparable design\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli class=\"level1\"\u003e\n\u003cdiv class=\"li\"\u003eΦ2mm mounting holes\u003c\/div\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eDocumentation and example code for this shield is\u003ca href=\"https:\/\/wiki.wemos.cc\/products:d1_mini_shields:sht30_shield\" title=\"WEMOS LOLIN I2C temperature and humidity sensor\"\u003e available here.\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eVersion: 2.1.0\u003c\/p\u003e","brand":"Wemos","offers":[{"title":"Default Title","offer_id":32901781258372,"sku":"LOLIN_SHT30","price":7.65,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0368\/0337\/9332\/products\/9068762678532556148_IMG_0821.jpg?v=1584962607"},{"product_id":"micro-metal-gearmotor-to-lego-axle-adaptor","title":"Micro Metal Gearmotor to LEGO® Axle Adaptor (pack of 4)","description":"\u003cp\u003eThis little dingus connects our popular \u003ca href=\"https:\/\/smalldevices.com.au\/products\/n20-series-micro-metal-gearmotor-50-1?variant=49855577863\"\u003emicro metal gearmotors\u003c\/a\u003e to a standard LEGO\u003csup\u003e®\u003c\/sup\u003e axle - ideal for making your brick creations move autonomously!\u003c\/p\u003e\n\u003cp\u003eInjection moulded from snazzy purple plastic they are made in the UK. Super-handy and durable for all sorts of projects - we've not managed to wear one out yet!\u003c\/p\u003e\n\u003cp\u003eEach pack contains four adaptors - you just bring the LEGO\u003csup\u003e®\u003c\/sup\u003e and \u003ca href=\"https:\/\/shop.pimoroni.com\/products\/micro-metal-gearmotor-extended-back-shaft\" target=\"_blank\" rel=\"noopener noreferrer\"\u003egearmotors\u003c\/a\u003e!\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #999999;\"\u003e\u003cem\u003eLEGO\u003csup\u003e®\u003c\/sup\u003e is a trademark of the LEGO Group of companies which does not sponsor, authorize or endorse this product.\u003c\/em\u003e\u003c\/span\u003e\u003c\/p\u003e","brand":"Pimoroni","offers":[{"title":"Default Title","offer_id":32901793382532,"sku":"PM_PIM132","price":6.55,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0368\/0337\/9332\/products\/PIM132_-_half_2_of_2.jpg?v=1584962682"},{"product_id":"plastic-pop-rivets-for-cardboard-crafts-100-pack","title":"Plastic Pop Rivets for Cardboard Crafts (100-pack)","description":"\u003cp\u003e\u003cstrong\u003eEnter the world of cardboard construction and build playful robot friends! \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eInstead of slapping on tape or waiting for your hot glue to warm up, you can use these \u003cstrong\u003ePlastic Pop Rivets\u003c\/strong\u003e! So easy to install. Just poke them through the cardboard and fasten with the back piece. This will ensure clean, movable joints and attachments. You can even remove them with some effort (but they'll hold as long as you don't pry them apart)\u003c\/p\u003e\n\u003cp\u003eWorks best with 2 ply cardboard, card stock or other paper products that are about 2mm thick. You can connect two pieces together with one rivet and they'll rotate. Two rivets can be used if you want them to stay still.\u003c\/p\u003e\n\u003cp\u003eComes in a pack of 100!\u003c\/p\u003e\n\u003cp\u003eGrab some cardboard and get making today.\u003c\/p\u003e","brand":"Adafruit","offers":[{"title":"Default Title","offer_id":32901799018628,"sku":"ADA-3821","price":21.95,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0368\/0337\/9332\/products\/3821-01.jpg?v=1584962715"},{"product_id":"motor-mount-for-tt-gearbox-dc-motors-l-bracket-type","title":"Motor Mount for TT Gearbox DC Motors - L-Bracket Type","description":"\u003cp\u003eYou have a \u003ca href=\"https:\/\/smalldevices.com.au\/products\/tt-motor-all-metal-gearbox-1-90-gear-ratio\"\u003eTT motor,\u003c\/a\u003e or a \u003ca href=\"https:\/\/smalldevices.com.au\/products\/dc-geared-motor-with-wheel\"\u003eplastic motor,\u003c\/a\u003e but you need to attach it to your CNC project, eh? Not so easy if you don't have an \u003cstrong\u003eL-Bracket DC Motor Mount\u003c\/strong\u003e just like this fine one here! Made of 2mm aluminum metal, it's got a solid construction and is easy to get going. There are 4 mounting screws so you know it'll be super-solid!\u003cbr\u003e\u003cbr\u003eComes with one mount and a bag of hardware for attachment:\u003c\/p\u003e\n\u003cp\u003e\u003cimg allowfullscreen=\"true\" alt=\"https:\/\/www.youtube.com\/embed\/SDdyPTQWOOk?start=89\" class=\"video-insert\" contenteditable=\"false\" frameborder=\"0\" src=\"https:\/\/img.youtube.com\/vi\/SDdyPTQWOOk\/hqdefault.jpg\"\u003e\u003c\/p\u003e\n\u003cdiv class=\"panel-collapse collapse in-md in-lg \" id=\"technical-details\"\u003e\n\u003ca class=\"invizzy-anchor\" id=\"technical-details-anchor\" name=\"technical-details\"\u003e\u003c\/a\u003e\n\u003cul id=\"product-files\"\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cdn-shop.adafruit.com\/product-files\/3768\/3768_diagram.jpg\"\u003eDiagram\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Adafruit","offers":[{"title":"Default Title","offer_id":32901800755332,"sku":"ADA-3768","price":2.95,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0368\/0337\/9332\/products\/3768-00.jpg?v=1584962729"},{"product_id":"kitronik-all-in-one-robotics-board-for-the-bbc-micro-bit","title":"Kitronik All-in-one Robotics Board for the BBC micro:bit","description":"\u003cmeta charset=\"utf-8\"\u003e\n\u003cp\u003e\u003cstrong\u003eTake your microbit robotics builds to the next level with the Kitronik All-in-one Robotics Board for the BBC micro:bit. The All-in-one Robotics Board enables the BBC micro:bit (connected via a standard card slot connector) to drive 4 motors (or 2 stepper motors) and 8 servos. Coupled with 17 other I\/O expansion points, this means the BBC micro:bit can very easily become the core of a whole variety of robotics projects.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe Robotics Board features 2 Dual H-Bridge Motor Driver ICs (capable of driving 2 standard motors or 1 stepper motor each) and 8 servo outputs (capable of driving \u003ca href=\"https:\/\/smalldevices.com.au\/products\/mini-180-degree-servo-with-accessories\"\u003estandard\u003c\/a\u003e and \u003ca href=\"https:\/\/smalldevices.com.au\/products\/fs90r-360-degree-continuous-rotation-servo\"\u003econtinuous rotation servos\u003c\/a\u003e), all controlled from the \u003ca href=\"https:\/\/smalldevices.com.au\/blogs\/resources\/connecting-i2c-devices-to-the-bbc-micro-bit\" title=\"microbit i2c tutorial\"\u003eBBC micro:bit using the I2C protocol \u003c\/a\u003evia a 16-channel driver IC.\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.kitronik.co.uk\/blog\/link-accessory-board-standard-bbc-microbit-accessories\/\"\u003eThe Link header\u003c\/a\u003e breaks out all the usable pins from the \u003ca href=\"https:\/\/smalldevices.com.au\/collections\/micro-bit-starters\/products\/micro-bit\"\u003eBBC micro:bit\u003c\/a\u003e, and is designed to allow 2.54mm pitch pin header to be easily soldered into place. The 17 available I\/O pins allow other input devices, such as sensors, or output devices, such as ZIP LEDs, to be added to the board. The I2C communication lines are also broken out (Pins 19 \u0026amp; 20), which means other I2C compatible devices can also be added to the board and controlled by the BBC micro:bit.\u003c\/p\u003e\n\u003cp\u003ePower is provided via either a terminal block or servo-style connector, and the board then produces a regulated 3.3V supply which is fed into the 3V and GND connections to power the connected BBC micro:bit, removing the need to power the BBC micro:bit separately. This also provides the reference voltage for the servo signal level-shift ICs. The 3V and GND pins are also broken out on the Link header, which means external devices can also be powered.\u003c\/p\u003e\n\u003cp\u003eTo use the Robotics Board, the BBC micro:bit should be inserted firmly into the edge connector, either way round. \u003ca href=\"https:\/\/www.kitronik.co.uk\/blog\/link-accessory-board-standard-bbc-microbit-accessories\/\"\u003eIf the Link header is being used\u003c\/a\u003e, the BBC micro:bit LED display should be facing them (see PCB text relating to this).\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAn all-in-one robotics control solution for the BBC micro:bit.\u003c\/li\u003e\n\u003cli\u003eIt can drive 4 \u003ca href=\"https:\/\/smalldevices.com.au\/search?q=dc+motor\" title=\"DC motor\"\u003emotors \u003c\/a\u003e(or 2 stepper motors) and 8 \u003ca href=\"https:\/\/smalldevices.com.au\/search?q=servos\" title=\"Electronic hobby servos available from Small Devices in Australia\"\u003eservos\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003eAll the usable pins of the microbit are broken out to a 2.54mm link header that is compatible with 2.54mm pitch pin headers.\u003c\/li\u003e\n\u003cli\u003eThe 17 available I\/O pins allow other input devices, such as sensors, or output devices, such as ZIP LEDs, to be added to the board.\u003c\/li\u003e\n\u003cli\u003ePower is provided via either a terminal block or servo-style connector.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eContains:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e1 x All-in-one Robotics Board for the BBC microbit.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eDimensions:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eLength: 68mm.\u003c\/li\u003e\n\u003cli\u003eWidth: 62mm.\u003c\/li\u003e\n\u003cli\u003ePCB Thickness: 1.6mm.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eVideo:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cdiv class=\"youtube video-container\"\u003e\u003ciframe width=\"1280\" height=\"720\" src=\"https:\/\/www.youtube.com\/embed\/EVowN8RN8nU\" frameborder=\"0\" allow=\"autoplay; encrypted-media\" allowfullscreen=\"\" data-ss1543663625=\"1\"\u003e\u003c\/iframe\u003e\u003c\/div\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eRequires:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/smalldevices.com.au\/collections\/micro-bit-starters\/products\/micro-bit-essentials-kit\"\u003eA BBC micro:bit.\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003eA\u003cspan\u003e micro\u003c\/span\u003eUSB Cable.\u003c\/li\u003e\n\u003cli\u003eSoldering Iron.\u003c\/li\u003e\n\u003cli\u003eSolder.\u003c\/li\u003e\n\u003cli\u003eWire Cutters.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eResources:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ca title=\"datasheet\" href=\"https:\/\/www.kitronik.co.uk\/pdf\/5641-microbit-robotics-board-datasheet.pdf\"\u003eDatasheet\u003c\/a\u003e.\u003cimg src=\"https:\/\/www.kitronik.co.uk\/pdf\/pdf_icon.gif\" alt=\"pdf_icon.gif\" width=\"25\" height=\"24\"\u003e\n\u003c\/li\u003e\n\u003cli\u003eDemo Code for programming in MicroPython is\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/github.com\/KitronikLtd\/micropython-microbit-kitronik-robotics\"\u003eavailable from GitHub\u003c\/a\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Kitronik Ltd","offers":[{"title":"Default Title","offer_id":32901814878340,"sku":"KT-5641","price":38.1,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0368\/0337\/9332\/products\/5641_large-all-in-1-robotics-board-microbit.jpg?v=1584962792"},{"product_id":"micro-metal-gearmotor-bracket-pair-white","title":"Micro Metal Gearmotor Bracket Pair - White","description":"\u003cmeta charset=\"utf-8\"\u003eUse these brackets for mounting \u003ca href=\"https:\/\/smalldevices.com.au\/products\/n20-series-micro-metal-gearmotor-50-1\"\u003emicro metal gearmotors.\u003c\/a\u003e The white plastic wraps securely around the motor body to hold it in place.","brand":"smalldevices","offers":[{"title":"Default Title","offer_id":32901823955076,"sku":"SD-GMMOUNT","price":6.95,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0368\/0337\/9332\/products\/mini_motor_bracket2.jpg?v=1584962807"},{"product_id":"adafruit-veml6075-uva-uvb-and-uv-index-sensor-breakout","title":"Adafruit VEML6075 UVA UVB and UV Index Sensor Breakout","description":"\u003cmeta charset=\"utf-8\"\u003e\n\u003cp style=\"display: inline !important;\"\u003e\u003cstrong\u003eThis little sensor is a great way to add UVA and UVB light sensing to any microcontroller project. The VEML6075 from Vishay has both true UVA and UVB band light sensors and an I2C-controlled ADC that will take readings and integrate them. The sensor also comes with calibration registers so you can easily convert the UVA\/UVB readings into the UV Index.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eUnlike the Si1145 sensor, this one has a real UV sensor, and in contrast to the VEML6070, it has dual band sensors and an Index calculation algorithm.\u003c\/p\u003e\n\u003cp\u003eThis UV sensor works great with 3 or 5V power or logic, its nice and compact, and its easy to use with any I2C-capable microcontroller. We have \u003ca href=\"https:\/\/github.com\/adafruit\/Adafruit_VEML6075\"\u003eexample code and libraries for Arduino\u003c\/a\u003e and \u003ca href=\"https:\/\/github.com\/adafruit\/Adafruit_CircuitPython_VEML6075\"\u003eCircuitPython\/Python\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eEach order comes with one assembled PCB with a sensor, power regulator, level shifting and a small piece of header. Some light soldering is required to attach the header but it's a fast task!\u003c\/p\u003e\n\u003ch3\u003e TECHNICAL DETAILS\u003c\/h3\u003e\n\u003cul id=\"prod-info\"\u003e\n\u003cli class=\"prod-accordion-content prod-accordion-content-technical-details mobile-text-wrapper\"\u003e\n\u003ca data-toggle=\"collapse\" href=\"https:\/\/www.adafruit.com\/#technical-details\" class=\"toggle-link\"\u003e\u003c\/a\u003e\n\u003cdiv class=\"panel-collapse collapse in-md in-lg \"\u003e\n\u003ca id=\"technical-details-anchor\" class=\"invizzy-anchor\" name=\"technical-details\"\u003e\u003c\/a\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"col-lg-12 col-md-12 col-sm-12 col-xs-12\"\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli\u003eUses I2C address 0x10\u003c\/li\u003e\n\u003cli\u003eProduct Dimensions: 17.0mm x 15.3mm x 2.9mm \/ 0.7\" x 0.6\" x 0.1\"\u003c\/li\u003e\n\u003cli\u003eProduct Weight: 0.8g \/ 0.0oz\u003c\/li\u003e\n\u003cli class=\"prod-accordion-content prod-accordion-content-technical-details mobile-text-wrapper\"\u003e\n\u003cdiv id=\"technical-details\" class=\"panel-collapse collapse in-md in-lg \"\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"col-lg-12 col-md-12 col-sm-12 col-xs-12\"\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"col-lg-12 col-md-1 col-sm-1 col-xs-2\"\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Adafruit","offers":[{"title":"Default Title","offer_id":32901825986692,"sku":"ADA-3964","price":12.95,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0368\/0337\/9332\/products\/3964-00.jpg?v=1584962829"},{"product_id":"tt-motor-encoders-pack-of-2","title":"TT Motor Encoders (Pack of 2)","description":"\u003cmeta charset=\"utf-8\"\u003e\n\u003cp\u003e\u003cstrong\u003ePlastic gear-box motors (also known as 'TT' motors) are an easy and low cost way to get your projects moving. They're low cost, durable, and easy to use. The trade-off for those low cost hobby motors is that they don't have any way of knowing their speed or location. Basically you send voltage in and get rotation out. Really expensive motors have encoders built in, and for these TT motors, we've now got some simple snap-on encoder wheels.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eTT Motor Encoder \u003c\/strong\u003eis solid, but thin, so it won't make your robot bulky. It even comes in Adafruit black!\u003c\/p\u003e\n\u003cp\u003eAre they laser-cut stainless steel? No. Do they have multiple gray-code notches? No. But what they\u003cspan\u003e \u003c\/span\u003e\u003cem\u003edo\u003c\/em\u003e\u003cspan\u003e \u003c\/span\u003ehave is black injection-molded plastic that snaps onto the 'opposite' end from your wheel.\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/www.electroschematics.com\/10494\/arduino-optical-position-rotary-encoder\/\"\u003eWith a simple photo interrupter sensor to count the ticks, you'll be able to know the speed of your wheel\u003c\/a\u003e, although not the rotation\u003cspan\u003e \u003c\/span\u003e\u003cem\u003edirection\u003c\/em\u003e.\u003c\/p\u003e\n\u003cp\u003eEach order comes with two encoders.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e This encoder is\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eonly for use with 'TT' gearbox DC motors\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eit's got an oval notch that snaps right in.\u003c\/p\u003e\n\u003cp\u003e\u003ciframe src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1595\/0669\/files\/3782-03.mp4?10478082713796998065\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003cmeta charset=\"utf-8\"\u003e\n\u003ch3 id=\"tab_technical-details\" class=\"hidden-sm hidden-xs\"\u003eTECHNICAL DETAILS\u003c\/h3\u003e\n\u003cdiv id=\"technical-details\" class=\"panel-collapse collapse in-md in-lg \"\u003e\n\u003ca id=\"technical-details-anchor\" class=\"invizzy-anchor\" name=\"technical-details\"\u003e\u003c\/a\u003e\n\u003cul\u003e\n\u003cli\u003eDiameter: 25.75mm \/ 1\"\u003c\/li\u003e\n\u003cli\u003eThickness: 2.55mm \/ .1\"\u003c\/li\u003e\n\u003cli\u003eWeight: 1g\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul id=\"product-files\"\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cdn-shop.adafruit.com\/product-files\/3782\/3782_diagram.jpg\"\u003eDiagram\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Adafruit","offers":[{"title":"Default Title","offer_id":32901827264644,"sku":"ADA-3782","price":2.95,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0368\/0337\/9332\/products\/3782-00_1b70246c-104b-4c90-b8bd-3b8c6d77e329.jpg?v=1584962835"},{"product_id":"tt-motor-all-metal-gearbox-1-90-gear-ratio","title":"TT Motor All-Metal Gearbox - 1:90 Gear Ratio","description":"\u003cp\u003eThese durable (but affordable!) gearbox motors (also known as 'TT' motors) are an easy, low-cost way to get your projects moving. This is a \u003cstrong\u003eTT DC All-Metal Gearbox Motor\u003c\/strong\u003e with a gear ratio of \u003cstrong\u003e1:90\u003c\/strong\u003e about \u003cstrong\u003edouble\u003c\/strong\u003e of the 'standard' 1:48 ratio. That gives them higher torque but slower rotational speed. Since they're slower they're good for robots where strength is more important than speed.\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/smalldevices.com.au\/collections\/parts\/products\/dc-geared-motor-with-wheel\"\u003eThey look a lot like our yellow all-plastic-gearbox motors\u003c\/a\u003e but these have all of the motor gears machined from steel, so they won't strip as easily, and they're twice as slow (and twice as powerful) given their lower gearbox ratio. The metal gears also mean they're louder when running.\u003c\/p\u003e\n\u003cp\u003eYou can power these motors with 3VDC up to 6VDC, they'll of course go a little faster at the higher voltages. We grabbed one motor and found these stats when running it from a bench-top supply\u003c\/p\u003e\n\u003cp\u003eNote that these are very basic motors, and have no built-in encoders, speed control or positional feedback. Voltage goes in, rotation goes out! There will be variation from motor to motor, so a separate feedback system is required if you need precision movement.\u003c\/p\u003e\n\u003cp\u003eComes 1 x per order, with just the motor. These motors \u003cem\u003edo not\u003c\/em\u003e come with wires attached, so you'll need to solder wires on yourself.\u003c\/p\u003e\n\u003cp\u003eYou \u003cem\u003ecannot\u003c\/em\u003e drive these directly from a microcontroller, \u003cstrong\u003ea high-current motor driver is required\u003c\/strong\u003e! These will work great with the \u003ca href=\"https:\/\/smalldevices.com.au\/search?q=crickit\"\u003eAdafruit Crickit board\u003c\/a\u003es or some of our other \u003ca href=\"https:\/\/smalldevices.com.au\/products\/motor-driver-board-v2-for-the-bbc-micro-bit\"\u003eMotor Driver boards\u003c\/a\u003e. You can also get these \u003ca href=\"https:\/\/smalldevices.com.au\/collections\/robotics\/products\/tt-motor-encoders-pack-of-2\"\u003eencoder wheels\u003c\/a\u003e for use with a photo encoder of your choice.\u003c\/p\u003e\n\u003cp\u003e\u003cimg allowfullscreen=\"true\" alt=\"https:\/\/www.youtube.com\/embed\/-CVv7haGF8U?start=66\" class=\"video-insert\" contenteditable=\"false\" frameborder=\"0\" src=\"https:\/\/img.youtube.com\/vi\/-CVv7haGF8U\/hqdefault.jpg\"\u003e\u003c\/p\u003e\n\u003cdiv class=\"panel-collapse collapse in-md in-lg \" id=\"technical-details\"\u003e\n\u003ca class=\"invizzy-anchor\" id=\"technical-details-anchor\" name=\"technical-details\"\u003e\u003c\/a\u003e\n\u003cp\u003eDimensions (excluding shaft): 69.5 x 22 x 20.7mm\u003c\/p\u003e\n\u003cp\u003eProduct Weight: 39.4g \/ 1.4oz\u003c\/p\u003e\n\u003cul id=\"product-files\"\u003e\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Adafruit","offers":[{"title":"Default Title","offer_id":32901833162884,"sku":"ADA-3802","price":15.5,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0368\/0337\/9332\/products\/3802-00.jpg?v=1584962854"},{"product_id":"4tronix-talon-grabber-for-bit-bot","title":"4Tronix Talon Claw\/Grabber for Bit:Bot (BitBot)","description":"\u003cmeta charset=\"utf-8\"\u003e\n\u003cp\u003e\u003cstrong\u003eThe Talon Claw\/Grabber is an accessory for the the Bit:Bot robot, allowing the robot to grasp small objects \u003c\/strong\u003e\u003cstrong\u003eusing standard servo code in \u003ca href=\"https:\/\/makecode.microbit.org\/\"\u003eMakeCode\u003c\/a\u003e for the micro:bit. Specific code has been added to the BitBot package to control this Talon directly.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThere's no soldering required. Just attach few screws and you're ready to go.\u003c\/p\u003e\n\u003cp\u003eIncluded are 3 PCBs that make up the Talon, a metal gear servo, and all the screws and pillars you will need. Also included is a Pimoroni spanner widget to help tighten the nylock nut.\u003c\/p\u003e\n\u003cp\u003eYou will require an\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/shop.4tronix.co.uk\/products\/anglebit-turn-your-bbc-micro-bit-by-90-degrees\" target=\"_blank\" title=\"Angle:Bit 90 Degree Adaptor\" rel=\"noopener noreferrer\"\u003eAngle:Bit\u003cspan\u003e \u003c\/span\u003e\u003c\/a\u003eor similar to allow access to the microbit once this is fitted\u003c\/p\u003e\n\u003cp\u003eNote that the \u003ca href=\"https:\/\/smalldevices.com.au\/collections\/4tronix\/products\/ultrasonic-distance-sensor-for-bit-bot\"\u003eultrasonic add-on\u003c\/a\u003e cannot be fitted at the same time as they use the same connections.\u003c\/p\u003e\n\u003cp\u003eSee\u003cspan\u003e the 4Tronix \u003c\/span\u003e\u003ca href=\"https:\/\/4tronix.co.uk\/blog\/?p=1792\" target=\"_blank\" title=\"Assembling the Talon Grabber\" rel=\"noopener noreferrer\"\u003e blog entry\u003cspan\u003e \u003c\/span\u003e\u003c\/a\u003efor assembly, setup and usage instructions.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e \u003ca href=\"https:\/\/smalldevices.com.au\/collections\/4tronix\/products\/bit-bot\"\u003eBit:Bot\u003c\/a\u003e and \u003ca href=\"https:\/\/smalldevices.com.au\/collections\/micro-bit-starters\/products\/micro-bit\"\u003emicro:bit \u003c\/a\u003enot included, but available separately.\u003c\/p\u003e","brand":"4Tronix","offers":[{"title":"Default Title","offer_id":32901836374148,"sku":"4T_TALONBB","price":19.95,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0368\/0337\/9332\/products\/IMG_2225a_1024x1024_05c6af27-2eda-48ec-ae53-7eb785921704.jpg?v=1584962867"},{"product_id":"adafruit-crickit-for-micro-bit","title":"Adafruit CRICKIT for micro:bit","description":"\u003cp\u003e\u003cstrong\u003eSometimes you want your micro:bit to be able to control and interact with more things, and 5v things at that!\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThat's why Adafruit designed \u003cstrong\u003eCrickit\u003c\/strong\u003e - That's our \u003cstrong\u003eC\u003c\/strong\u003ereative \u003cstrong\u003eR\u003c\/strong\u003eobotics \u0026amp; \u003cstrong\u003eI\u003c\/strong\u003enteractive \u003cstrong\u003eC\u003c\/strong\u003eonstruction \u003cstrong\u003eKit\u003c\/strong\u003e. It's an add-on to the \u003ca href=\"https:\/\/smalldevices.com.au\/collections\/micro-bit-starters\/products\/micro-bit\"\u003eBBC's micro:bit\u003c\/a\u003e that lets you \u003cstrong\u003e#MakeRobotFriend\u003c\/strong\u003e using MakeCode or Arduino.\u003c\/p\u003e\n\u003cp\u003ePlug your :bit into the 40 pin edge connector and start controlling motors, servos, solenoids. You also get signal pins, capacitive touch sensors, a NeoPixel driver and amplified speaker output. It complements \u0026amp; extends micro:bit so you can still use all the goodies on the :bit, but now you have a robotics playground as well.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThe CRICKIT for micro:bit supports \u003ca href=\"https:\/\/learn.adafruit.com\/adafruit-crickit-creative-robotic-interactive-construction-kit\/makecode\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eMakeCode\u003c\/a\u003e, \u003ca href=\"https:\/\/learn.adafruit.com\/using-micro-bit-and-crickit-with-micropython\/testing-crickit-s-features\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eMicroPython\u003c\/a\u003e \u0026amp; \u003ca href=\"https:\/\/learn.adafruit.com\/adafruit-crickit-creative-robotic-interactive-construction-kit\/arduino-code\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eArduino\u003c\/a\u003e!\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe Crickit is powered by seesaw, our I2C-to-whatever bridge firmware. So you only need to use two data pins to control the huge number of inputs and outputs on the Crickit. All those timers, PWMs, sensors are offloaded to the co-processor.\u003c\/p\u003e\n\u003cmeta charset=\"utf-8\"\u003e\n\u003cp\u003eYou get:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e4 x Analog or Digital Servo control, with precision 16-bit timers\u003c\/li\u003e\n\u003cli\u003e2 x Bi-directional brushed DC motor control, 1 Amp current limited each, with 8-bit PWM speed control (or one stepper)\u003c\/li\u003e\n\u003cli\u003e4 x High current \"Darlington\" 500mA drive outputs with kick-back diode protection. For solenoids, relays, large LEDs, or one uni-polar stepper\u003c\/li\u003e\n\u003cli\u003e4 x Capacitive touch input sensors with alligator-pads\u003c\/li\u003e\n\u003cli\u003e8 x Signal pins, can be used as digital in\/out or analog inputs\u003c\/li\u003e\n\u003cli\u003e1 x NeoPixel driver with 5V level shifter - this is connected to micro:bit pin #16 so you can use MakeCode's built-in NeoPixel control\u003c\/li\u003e\n\u003cli\u003e1 x Class D, 4-8 ohm speaker, 3W-max audio amplifier - this is connected to micro:bit pin #1 which is the default audio output\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eAll are powered via 5V DC, so you can use any 5V-powered servos, DC motors, steppers, solenoids, relays etc. To keep things simple and safe, we don't support mixing voltages, so only 5V, not for use with 9V or 12V robotic components.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePlease note this robot board does not require any soldering but you will need a \u003ca href=\"https:\/\/smalldevices.com.au\/products\/5v-dc-2a-power-supply-adapter-with-2-1mm-plug\" target=\"_blank\" title=\"5v 2A DC power supply available at Small Devices Australia\" rel=\"noopener noreferrer\"\u003epower supply\u003c\/a\u003e and a micro:bit to go along with the Crickit, and these are not included! You can also use a battery cage with a 2.1mm plug.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/smalldevices.com.au\/collections\/robotics\" title=\"Small Devices Robotics for parts and microcontrollers and more in Australia\"\u003eAnd of course we have a huge collection of all compatible lights, motors, servos, speakers and more in our Robotics category!\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eSince you'll be working with high-current devices, we wanted to have a good solid power supply system that minimises risk of damage. The power supply has an \u003ca href=\"http:\/\/www.ti.com\/product\/TPS2595\"\u003e'eFuse' management chip\u003c\/a\u003e that will automatically turn off if the voltage goes above 5.5V or below 3V and has over-current protection at 4A. Every motor driver has kick-back protection. We think this is a nice and durable board for robotics!\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003ca href=\"https:\/\/learn.adafruit.com\/adafruit-crickit-creative-robotic-interactive-construction-kit\"\u003eLots more details, schematics, specifications, and code examples in the Adafruit Learn guide.\u003c\/a\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003ciframe allowfullscreen=\"true\" alt=\"https:\/\/www.youtube.com\/embed\/WQQnPJ0H_gE?start=767\" class=\"video-insert\" contenteditable=\"false\" frameborder=\"0\" src=\"https:\/\/www.youtube.com\/embed\/WQQnPJ0H_gE?start=767\"\u003e\u003c\/iframe\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cdiv class=\"panel-collapse collapse in-md in-lg \" id=\"technical-details\"\u003e\n\u003cul id=\"product-files\"\u003e\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Adafruit","offers":[{"title":"Default Title","offer_id":32901849579652,"sku":"ADA-3928","price":55.95,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0368\/0337\/9332\/products\/3928-01.jpg?v=1584962898"},{"product_id":"hcsr04-ultrasonic-proximity-sensor","title":"HCSR04 - Ultrasonic Proximity Sensor","description":"\u003cp\u003eUse this proximity sensor to measure distance - it works by sending out an ultrasonic signal and listening for a response!\u003c\/p\u003e\n\u003cp\u003eThis is a 5v sensor, so will need  a suitable external power supply if using this with a micro:bit (there's an example \u003ca href=\"https:\/\/makecode.microbit.org\/22449-66025-47572-42128\"\u003ein MakeCode here\u003c\/a\u003e).\u003c\/p\u003e\n\u003cp\u003e The datasheet is \u003ca href=\"https:\/\/www.mouser.com\/ds\/2\/813\/HCSR04-1022824.pdf\"\u003eavailable here.\u003c\/a\u003e\u003c\/p\u003e","brand":"smalldevices","offers":[{"title":"Default Title","offer_id":32901850398852,"sku":"SD-HCSR04","price":4.95,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0368\/0337\/9332\/products\/hcsr04_front.jpg?v=1584962905"},{"product_id":"kitronik-line-following-buggy-for-the-bbc-micro-bit-v2-0","title":"Kitronik Line Following Buggy for the BBC micro:bit V2.0","description":"\u003cmeta charset=\"utf-8\"\u003e\n\u003cp\u003e\u003cstrong\u003eThis easy to build micro:bit controlled Line Following Buggy features the Kitronik Motor Driver board and the :MOVE Line Following Board - It's ideal for classrooms!\u003c\/strong\u003e\u003c\/p\u003e\n\u003cmeta charset=\"utf-8\"\u003e\n\u003cp\u003eThe Line Following Buggy with :MOVE line following board for the BBC microbit is the newest version of our very popular line following buggy. It offers a significant upgrade in the form of our new :MOVE line following board. Not only does it provide far superior line following it also makes the kit much easier to assemble, making it a suitable activity for younger children.\u003c\/p\u003e\n\u003cp\u003eThe line following board is supplied pre-assembled, so no soldering of components is required. The only soldering required for assembly is to attach the wires to the two motors.\u003c\/p\u003e\n\u003cp\u003eThe board design is such that the buggy can either follow a dark line on a light background or a light line on a dark background. For best results, ensure there is approx. 5mm clearance between the bottom of the board and the driving surface.\u003c\/p\u003e\n\u003cp\u003eAlso, the sensitivity of the line following can be adjusted via the two onboard pots, one for each detector. The same pots are also used to change the type of line that will be followed; to detect darker, turn the pot clockwise and to detect lighter, turn the pot anti-clockwise.\u003c\/p\u003e\n\u003cp\u003eIn addition, although the buggy has been designed to follow lines, due to the flexibility of both the microbit and the Kitronik Motor Driver board it can also be used as a remote-controlled robot buggy. Kitronik has an\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/play.google.com\/store\/apps\/details?id=com.kitronik.blemove\"\u003eApp for that\u003c\/a\u003e!\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSimple to build buggy.\u003c\/li\u003e\n\u003cli\u003eBBC micro:bit controlled.\u003c\/li\u003e\n\u003cli\u003eThe kit features a new and improved line following board.\u003c\/li\u003e\n\u003cli\u003eIt can be configured to either follow a dark line on a light back ground or a light line on a dark background.\u003c\/li\u003e\n\u003cli\u003eThe line following sensitivity can be adjusted with a screwdriver.\u003c\/li\u003e\n\u003cli\u003eExample line following code is provided.\u003c\/li\u003e\n\u003cli\u003eAlso, the buggy can easily be re-purposed for remote control over Bluetooth or Radio.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eContents:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e2 x\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/smalldevices.com.au\/collections\/freetronics\/products\/dc-geared-motor-with-wheel\" target=\"_blank\" title=\"DC hobby motor with wheel - just the thing for getting started with robots\" rel=\"noopener noreferrer\"\u003eRight Angle Hobby Geared Motor and wheel\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003e1 x\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/smalldevices.com.au\/collections\/kitronik-ltd\/products\/motor-driver-board-v2-for-the-bbc-micro-bit\" title=\"Kitronik Motor Board v2.0 for the BBC micro:bit available in Australia from Small Devices\"\u003eMotor Driver Board V2 for the BBC micro:bit\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003e1 x\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/smalldevices.com.au\/collections\/robotics\/products\/pololu-ball-caster\" title=\"Robot caster\"\u003eSteel Ball Caster 16mm Metal Ball\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003e1 x\u003cspan\u003e \u003c\/span\u003e4xAA Battery Box with Switch.\u003c\/li\u003e\n\u003cli\u003e1 x\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/www.kitronik.co.uk\/5629-move-line-following-board-for-bbc-microbit.html\"\u003eMOVE Line Following Board\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003e1 x\u003cspan\u003e \u003c\/span\u003ePerspex Buggy Chassis.\u003c\/li\u003e\n\u003cli\u003e1 x\u003cspan\u003e \u003c\/span\u003ePerspex :MOVE board mount.\u003c\/li\u003e\n\u003cli\u003e1 x 1mm x 12mm x 25mm Foam Pad.\u003c\/li\u003e\n\u003cli\u003e4 x\u003cspan\u003e \u003c\/span\u003ePlastic Spacer 20mm.\u003c\/li\u003e\n\u003cli\u003e12 x\u003cspan\u003e \u003c\/span\u003ePan Head M3 6mm Machine Screw.\u003c\/li\u003e\n\u003cli\u003e4 x\u003cspan\u003e \u003c\/span\u003ePan Head M3 10mm Machine Screw.\u003c\/li\u003e\n\u003cli\u003e10 x\u003cspan\u003e \u003c\/span\u003eM3 Hex Full Width Nut.\u003c\/li\u003e\n\u003cli\u003e4 x\u003cspan\u003e \u003c\/span\u003ePlastic Hex M3 Standoff, M-F.\u003c\/li\u003e\n\u003cli\u003e2 x\u003cspan\u003e \u003c\/span\u003ePan Head M3 30mm Machine Screw.\u003c\/li\u003e\n\u003cli\u003e10 x\u003cspan\u003e \u003c\/span\u003eJumper Wires 20cm M\/F.\u003c\/li\u003e\n\u003cli\u003e1 x\u003cspan\u003e \u003c\/span\u003e15cm Multi-strand Cable, Black.\u003c\/li\u003e\n\u003cli\u003e1 x\u003cspan\u003e \u003c\/span\u003e15cm Multi-strand Cable, White.\u003c\/li\u003e\n\u003cli\u003e1 x\u003cspan\u003e \u003c\/span\u003e15cm Multi-strand Cable, Green.\u003c\/li\u003e\n\u003cli\u003e1 x\u003cspan\u003e \u003c\/span\u003e15cm Multi-strand Cable, Blue.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eRequires:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e4 x\u003cspan\u003e \u003c\/span\u003eAA Batteries.\u003c\/li\u003e\n\u003cli\u003eA small flat head screwdriver.\u003c\/li\u003e\n\u003cli\u003eWire strippers.\u003c\/li\u003e\n\u003cli\u003eA\u003cspan\u003e \u003c\/span\u003esoldering iron\u003cspan\u003e \u003c\/span\u003eand some\u003cspan\u003e \u003c\/span\u003esolder.\u003c\/li\u003e\n\u003cli\u003eA\u003cspan\u003e \u003c\/span\u003epair of pliers.\u003c\/li\u003e\n\u003cli\u003eA Phillips screwdriver.\u003c\/li\u003e\n\u003cli\u003eA computer with a spare USB port and Internet access.\u003c\/li\u003e\n\u003cli\u003e1 x\u003cspan\u003e \u003c\/span\u003e\u003ca title=\"bbc microbit\" href=\"https:\/\/smalldevices.com.au\/collections\/micro-bit-starters\/products\/micro-bit\"\u003eBBC micro:bit\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/smalldevices.com.au\/products\/usb-a-to-microb-cable-black\"\u003eA USB to micro USB cable\u003c\/a\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eResources:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ca title=\"Line Following Buggy Build Instructions\" href=\"https:\/\/www.kitronik.co.uk\/pdf\/5638-line-following-buggy-robot-microbit-v2-build-instructions.pdf\"\u003eBuild Instructions\u003c\/a\u003e.\u003cimg src=\"https:\/\/www.kitronik.co.uk\/pdf\/pdf_icon.gif\" alt=\"pdf_icon.gif\" width=\"25\" height=\"24\"\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/www.kitronik.co.uk\/pdf\/5629-move-line-following-board-microbit-datasheet.pdf\"\u003eLine Following board Datasheet\u003c\/a\u003e.\u003cimg src=\"https:\/\/www.kitronik.co.uk\/pdf\/pdf_icon.gif\" alt=\"pdf_icon.gif\" width=\"25\" height=\"24\"\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003ca title=\"5638 Line following buggy code\" href=\"https:\/\/www.kitronik.co.uk\/zip\/5638-microbit-line-following-buggy-v2-microbit-buggy-code.zip\"\u003eLine following code\u003c\/a\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Kitronik Ltd","offers":[{"title":"Default Title","offer_id":32901852397700,"sku":"KT-5638","price":49.95,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0368\/0337\/9332\/products\/5638_press-line-following-buggy-microbit-v2-assembled.jpg?v=1584962915"},{"product_id":"waveshare-kitibot-tracked-robot-building-kit-for-micro-bit","title":"Waveshare KitiBot Tracked Robot Building Kit for micro:bit","description":"\u003cmeta charset=\"utf-8\"\u003e\n\u003cp\u003e\u003cstrong\u003eThis sturdy robot for the BBC \u003c\/strong\u003e\u003cstrong\u003emicro:bit (included), boasts a sheet metal body and a recharge circuit for Li-ion batteries, as well as multi-coloured LEDs, stable line-following sensors, and a distance sensor mounted on a pan\/tilt bracket. Oh, and did we mention it runs on tracks for navigating more interesting terrain?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eDocumentation and code examples are \u003ca href=\"http:\/\/www.waveshare.com\/wiki\/KitiBot_for_micro:bit\"\u003eavailable here\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e this product requires one \u003ca href=\"https:\/\/smalldevices.com.au\/collections\/altronics\/products\/18650-samsung-3500mah-li-ion-rechargeable-battery\" target=\"_blank\" rel=\"noopener noreferrer\"\u003e18650 battery\u003c\/a\u003e to work, which are NOT included and should be purchased separately.\u003c\/p\u003e\n\u003ch4\u003e FEATURES\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eOnboard connector for plugging in micro:bit\u003c\/li\u003e\n\u003cli\u003eIntegrates the MP2636 Li-ion battery charger with system boost, allowing charging of the battery whilst in use\u003c\/li\u003e\n\u003cli\u003eIntegrates the DW01+8205S Li-ion battery protection circuitry: reverse protection, over charge\/discharge protection, over current protection, and short circuit protection\u003c\/li\u003e\n\u003cli\u003eIntegrates the TB6612FNG dual H bridge motor driver, which is high efficiency, and low heating\u003c\/li\u003e\n\u003cli\u003eIntegrates the PCA9685 PWM controller, micro:bit IO expansion\u003c\/li\u003e\n\u003cli\u003eIntegrates the TLC1543 AD acquisition chip, allows connection of multiple analog sensors to the micro:bit\u003c\/li\u003e\n\u003cli\u003eIntegrates 4x APA102 colorful LEDs, dual-line control, with no more conflicts between the WS2812B RGB LED and Bluetooth\u003c\/li\u003e\n\u003cli\u003eOnboard buzzer to play music\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1595\/0669\/files\/KitiBot-for-micro-bit-intro.jpg?8479257928280923377\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003emicro:bit connector\u003c\/strong\u003e – for connecting micro:bit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMP2636\u003c\/strong\u003e – power management, for both charging and boost discharging the battery\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e8205S\u003c\/strong\u003e – dual N-Ch MOSFET, for circuit protection\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDW01\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e– Li-ion battery protection charge\/discharge protection\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRT9193-33\u003c\/strong\u003e – 3.3V voltage regulator, supplies power for micro:bit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMLT-8530\u003c\/strong\u003e – buzzer\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePCA9685\u003c\/strong\u003e – PWM controller, micro:bit IO expansion, I2C interface\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTB6612FNG\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e– dual H bridge motor driver\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTLC1543\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e– 10-bit AD acquisition chip, allows connect line tracking analog sensor to the micro:bit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAPA102\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e– dual-line control RGB LED\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e18650 battery holder\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003ePower switch\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMicro USB power interface\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e– for charging the Li-ion battery\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIndicators\u003c\/strong\u003e\u003cbr\u003eWARNING: Li-ion battery reverse warning\u003cbr\u003eCHG: charge mode\u003cbr\u003eBOOT: boost mode\u003cbr\u003ePWR: power\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eModule connectors (bottom side)\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e– for connecting servo, ultrasonic module, line tracking module\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eMotor connectors (bottom side)\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/1595\/0669\/files\/KitiBot-for-micro-bit-T-detail_02_0148a8ae-74d3-474d-9fc6-8341601ee138_2048x2048.jpg?v=1535524299\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/1595\/0669\/files\/KitiBot-for-micro-bit-T-detail_03_1024x1024.jpg?v=1535524261\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/1595\/0669\/files\/KitiBot-for-micro-bit-T-detail_04_2048x2048.jpg?v=1535524311\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cul\u003e\u003c\/ul\u003e","brand":"Waveshare","offers":[{"title":"Default Title","offer_id":32901867634820,"sku":"WS-14981","price":199.95,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0368\/0337\/9332\/products\/kitibot-for-micro-bit-t-8_2.jpg?v=1584962963"},{"product_id":"adafruit-crickit-for-circuit-playground-express","title":"Adafruit CRICKIT for Circuit Playground Express","description":"\u003cp\u003eSometimes we wonder if robotics engineers ever watch movies. If they did, they'd know that making robots into slaves always ends up in a robot rebellion. Why even go down that path? Here at Adafruit, we believe in making robots our \u003cstrong\u003efriends!\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eSo if you find yourself wanting a companion, consider the robot. They're fun to program, and you can get creative with decorations.\u003c\/p\u003e\n\u003cp\u003eWith that in mind, Adafruit designed \u003cstrong\u003eCrickit\u003c\/strong\u003e - That's the \u003cstrong\u003eC\u003c\/strong\u003ereative \u003cstrong\u003eR\u003c\/strong\u003eobotics \u0026amp; \u003cstrong\u003eI\u003c\/strong\u003enteractive \u003cstrong\u003eC\u003c\/strong\u003eonstruction \u003cstrong\u003eKit\u003c\/strong\u003e. It's an add-on to our popular Circuit Playground Express that lets you \u003cstrong\u003e#MakeRobotFriend\u003c\/strong\u003e using CircuitPython, MakeCode (coming soon), or Arduino.\u003c\/p\u003e\n\u003cp\u003eBolt on your Circuit Playground using the included stand-off bolts and start controlling motors, servos, solenoids. You also get signal pins, capacitive touch sensors, a NeoPixel driver and amplified \u003ca href=\"https:\/\/smalldevices.com.au\/search?q=speaker\"\u003espeaker\u003c\/a\u003e output. It complements \u0026amp; extends the Circuit Playground so you can still use all the goodies on the CPX, but now you have a robotics playground as well.\u003c\/p\u003e\n\u003cp\u003eThe Crickit is powered by seesaw, our I2C-to-whatever bridge firmware. So you only need to use two data pins to control the huge number of inputs and outputs on the Crickit. All those timers, PWMs, sensors are offloaded to the co-processor.\u003c\/p\u003e\n\u003cp\u003eYou get:\u003c\/p\u003e\n\u003cp\u003eAll are powered via 5V DC, so you can use any 5V-powered \u003ca href=\"https:\/\/smalldevices.com.au\/search?q=servo\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eservos\u003c\/a\u003e, \u003ca href=\"https:\/\/smalldevices.com.au\/products\/dc-geared-motor-with-wheel\"\u003eDC motors\u003c\/a\u003e, steppers, solenoids, relays etc. To keep things simple and safe, we don't support mixing voltages, so only 5V, not for use with 9V or 12V robotic components.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePlease note this robot board does not require any soldering but you will need \u003ca href=\"https:\/\/smalldevices.com.au\/products\/5v-dc-2a-power-supply-adapter-with-2-1mm-plug\" target=\"_blank\" title=\"5V 2A DC power supply to 2.1mm plug for Australian mains power points\" rel=\"noopener noreferrer\"\u003ea power supply\u003c\/a\u003e and a \u003ca href=\"https:\/\/smalldevices.com.au\/collections\/adafruit\/products\/adafruit-crickit-for-circuit-playground-express\" title=\"Get the Adafruit Circuit Playground Express in Australia at Small Devices\"\u003eCircuit Playground Express\u003c\/a\u003e to go along with the Crickit and these are not included! You can also use your favourite battery cage or battery with \u003ca href=\"https:\/\/smalldevices.com.au\/products\/male-dc-2-1mm-plug-to-screw-terminal\"\u003ethis 2.1mm plug to terminal adapter\u003c\/a\u003e.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eSince you'll be working with high-current devices, we wanted to have a good solid power supply system that minimizes risk of damage. The power supply has an 'eFuse' management chip that will automatically turn off if the voltage goes above 5.5V or below 3V and has over-current protection at 4A. Every motor driver has kick-back protection. We think this is a nice and durable board for robotics!\u003c\/p\u003e\n\u003cp\u003eAlternatively, for portability we recommend using \u003ca href=\"https:\/\/smalldevices.com.au\/products\/4xaaa-battery-box-with-switch\" title=\"Battery cage for the Adafruit Crickit\"\u003ea battery cage with 4 x AAA\u003c\/a\u003e \u003cstrong\u003e\u003cem\u003erechargable NiMH batteries\u003c\/em\u003e\u003c\/strong\u003e, as these hold a reasonably steady 1.2 volts until discharged. Note that alkaline batteries typically start at 1.5 volts i.e. four alkaline batteries will have too high a voltage and not work withthe Crickit.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003ca href=\"https:\/\/learn.adafruit.com\/adafruit-crickit-creative-robotic-interactive-construction-kit\"\u003eLots more details, schematics, specifications, and code examples in the (still in progress) Adafruit Learn guide.\u003c\/a\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInstructions for upgrading your Circuit Playground Express to the latest version of CircuitPython that supports the Crickit \u003ca href=\"https:\/\/learn.adafruit.com\/adafruit-crickit-creative-robotic-interactive-construction-kit\/circuitpython-code\"\u003ecan be found here.\u003c\/a\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWe also recommend that you update your Crickit's firmware when you get it - there's \u003ca href=\"https:\/\/learn.adafruit.com\/adafruit-crickit-creative-robotic-interactive-construction-kit\/update-your-crickit\"\u003einstructions for that here.\u003c\/a\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProduct Dimensions:\u003c\/strong\u003e 85.0mm x 81.0mm x 14.7mm \/ 3.3\" x 3.2\" x 0.6\"\u003c\/p\u003e\n\u003cdiv class=\"panel-collapse collapse in-md in-lg \" id=\"technical-details\"\u003e\n\u003cp\u003e\u003cstrong\u003eProduct Weight:\u003c\/strong\u003e 30.7g \/ 1.1oz\u003c\/p\u003e\n\u003cul id=\"product-files\"\u003e\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Adafruit","offers":[{"title":"Default Title","offer_id":32901889097860,"sku":"ADA-3093","price":55.15,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0368\/0337\/9332\/products\/3093-07.jpg?v=1584963047"},{"product_id":"micro-gamepad","title":"micro:Gamepad","description":"\u003csection class=\"info_INTRODUCTION\"\u003e\n\u003cp\u003e\u003cstrong\u003eThe micro:bit gamepad is an expansion gamepad based around the \u003ca href=\"https:\/\/smalldevices.com.au\/collections\/micro-bit-starters\/products\/micro-bit\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eBBC micro:bit.\u003c\/a\u003e Plug in the micro:bit, and turn it into a wireless remote controller for robots, or a wireless game console - great for making jumping block games or snake and maze games!\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe gamepad boasts an acrylic plate, so you're not just gripping a bare circuit board. There's 8 buttons, with up, down, left, right on the left-hand size, and X, Y buttons on the right, and two buttons A, B in the front of the gamepad. The gamepad also has programmable built-in vibration, a buzzer, and LED. Using graphical programming, it will turn into a multimedia vibration controller or multimedia interactive game console instantly. The programming platform supports \u003ca href=\"https:\/\/makecode.microbit.org\/\"\u003eMakeCode\u003c\/a\u003e graphical programming and \u003ca href=\"http:\/\/microbit-micropython.readthedocs.io\/en\/latest\/\"\u003eMicroPython\u003c\/a\u003e. It's a great tool for both the beginner and advanced programmer. \u003c\/p\u003e\n\u003c\/section\u003e\n\u003csection class=\"info_SPECIFICATION\"\u003e\n\u003ch4\u003eSPECIFICATIONS\u003c\/h4\u003e\n\u003cli\u003eOperating Voltage: 3VDC (2 AAA batteries)\u003c\/li\u003e\n\u003cli\u003eNumber of Buttons: Up, Down, Left, Right, X, Y, A, B Total 8 programmable buttons\u003c\/li\u003e\n\u003cli\u003eOnboard Vibration motor × 1\u003c\/li\u003e\n\u003cli\u003eOnboard LED × 1\u003c\/li\u003e\n\u003cli\u003eOnboard Buzzer × 1\u003c\/li\u003e\n\u003cli\u003eAcrylic Floor x 1\u003c\/li\u003e\n\u003cli\u003eAcrylic Panel × 1\u003c\/li\u003e\n\u003cli\u003eBattery Box with Cover × 1\u003c\/li\u003e\n\u003cli\u003eVelcro × 2\u003c\/li\u003e\n\u003cli\u003eCopper Cylinder × 4\u003c\/li\u003e\n\u003cli\u003eScrew × 8\u003c\/li\u003e\n\u003cli\u003eBig Button ×6\u003c\/li\u003e\n\u003cli\u003eSmall Button× 2\u003c\/li\u003e\n\u003cli\u003eDimension:148x57(mm)\/ 5.83*2.24in\u003c\/li\u003e\n\u003c\/section\u003e\n\u003csection class=\"info_DOCUMENTS\"\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch4\u003eDOCUMENTATION\u003c\/h4\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.dfrobot.com\/wiki\/index.php\/Micro:bit_Gamepad_Expansion_Board_SKU:_DFR0536\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eProduct wiki\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/section\u003e","brand":"DFRobot","offers":[{"title":"Default Title","offer_id":32901894865028,"sku":"DFR-1711","price":34.15,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0368\/0337\/9332\/products\/DFR0536-900x600.jpg?v=1584963069"},{"product_id":"sparkfun-pi-servo-hat","title":"SparkFun Pi Servo HAT","description":"\u003cp\u003e\u003cstrong\u003eThe SparkFun Pi Servo HAT allows your Raspberry Pi to control up to 16 servo motors in a straightforward and uncomplicated manner via an I\u003csup\u003e2\u003c\/sup\u003eC connection.\u003c\/strong\u003e Thanks to its I\u003csup\u003e2\u003c\/sup\u003eC capabilities, this PWM HAT saves the Raspberry Pi’s GPIO, allowing you to use them for other purposes. Additionally, the Pi Servo HAT adds a serial terminal connection, which will allow you to bring up a Raspberry Pi without having to hook it up to a monitor and keyboard.\u003c\/p\u003e\n\u003cp\u003ePower to the SparkFun Pi Servo HAT is supplied by a microUSB connector that can be used to power the servo motors only, or to power the servo motors as well as the Pi that is connected to the HAT. This USB connector can also be used to hook up the Pi via serial port connection to avoid having to use a monitor and keyboard for setting up the Pi. To supply power only to the servo power rail (and not the Pi’s 5V power rail), you just need to remove a small blob of solder on the isolation jumper. Doing this allows you to drive heavier loads coming from multiple or larger servos.\u003c\/p\u003e\n\u003cp\u003eEach of this HAT’s 16 servo motor pin headers has been spaced out the correct distance from the others to make it easier to attach your servo motors. They are pinned out in the proper order for most hobby-type servo motor connectors. The Pi Servo Hat is the same size and form factor as a Raspberry Pi Zero and Zero W, but it can also operate with a regular Raspberry Pi.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e This HAT does not include headers to connect to a Raspberry Pi, those will need to be purchased separately. You can find a range of headers \u003ca href=\"https:\/\/smalldevices.com.au\/search?q=headers\" target=\"_blank\" title=\"Raspberry Pi Headers and more available in Australia at Small Devices\" rel=\"noopener noreferrer\"\u003ehere\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003e\u003ca class=\"btn btn-default\" href=\"https:\/\/learn.sparkfun.com\/tutorials\/pi-servo-hat-hookup-guide\"\u003eGet Started with the SparkFun Pi Servo HAT Guide\u003c\/a\u003e\u003c\/p\u003e\n\u003cdiv class=\"tab-pane fade\" id=\"documents-tab\" role=\"tabpanel\"\u003e\n\u003cdiv class=\"col-sm-12\"\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cdn.sparkfun.com\/assets\/1\/a\/1\/6\/3\/PI_Servo_Shield_v10.pdf\"\u003eSchematic\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cdn.sparkfun.com\/assets\/5\/9\/9\/4\/3\/PI_Servo_Shield_v10_1.zip\"\u003eEagle Files\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/learn.sparkfun.com\/tutorials\/pi-servo-hat-hookup-guide\"\u003eHookup Guide\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/www.nxp.com\/docs\/en\/data-sheet\/PCA9685.pdf\"\u003eDatasheet\u003c\/a\u003e (PCA9685)\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/github.com\/sparkfun\/Pi_Servo_Hat\"\u003eGitHub\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"SparkFun","offers":[{"title":"Default Title","offer_id":32901919113348,"sku":"SF-14328","price":16.75,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0368\/0337\/9332\/products\/14328-01.jpg?v=1584963155"},{"product_id":"4tronix-bit-commander-console-controller-for-bbc-microbit-bitcommander","title":"4Tronix Bit:Commander Console \u0026 Controller for BBC MicroBit (BitCommander)","description":"\u003cmeta charset=\"utf-8\"\u003e\n\u003cp\u003e\u003cstrong\u003eThe Bit:Commander is a great device for powering and experimenting with the BBC micro:bit. It combines a speaker, RGB LEDs, battery cage, extra buttons, on\/off switch, analog dial, and joystick all in one compact unit.\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch2\u003eOverview\u003c\/h2\u003e\n\u003cp\u003eAs well as a battery pack (3 x AA batteries required), the Bit:Commander includes\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eEdge Connector for easy connection of the BBC micro:bit\u003c\/li\u003e\n\u003cli\u003eOn\/off switch\u003c\/li\u003e\n\u003cli\u003eBlue power indicator\u003c\/li\u003e\n\u003cli\u003e6 multi-colour RGB LEDs (aka neopixels)\u003c\/li\u003e\n\u003cli\u003e4 square 12mm push buttons with coloured caps (Red. Yellow, Green, Blue)\u003c\/li\u003e\n\u003cli\u003eAnalog dial input with Min, Max and intermediate markings\u003c\/li\u003e\n\u003cli\u003eAnalog Joystick with X and Y movement and a push switch\u003c\/li\u003e\n\u003cli\u003ePowered miniature speaker\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSuggested uses:\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eActing as a remote control for another micro:bit device, such as a Bit:Bot\u003c\/li\u003e\n\u003cli\u003eActing as a self-contained portable (no wires) games console\u003c\/li\u003e\n\u003cli\u003eExperimenting with various Digital and Analog inputs available as well as the speaker and neopixel outputs\u003c\/li\u003e\n\u003cli\u003eEverything is pre-fitted. No wires, soldering or jumpoers to fiddle with\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003ePin Connections:\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eSpeaker: Pin 0 (*)\u003c\/li\u003e\n\u003cli\u003eDial: Pin 0 (*)\u003c\/li\u003e\n\u003cli\u003eJoystick X: Pin 1\u003c\/li\u003e\n\u003cli\u003eJoystick Y: Pin 2\u003c\/li\u003e\n\u003cli\u003eJoystick button: Pin 8\u003c\/li\u003e\n\u003cli\u003eNeopixels: Pin 13\u003c\/li\u003e\n\u003cli\u003eRed Button: Pin 12\u003c\/li\u003e\n\u003cli\u003eYellow Button: Pin 16\u003c\/li\u003e\n\u003cli\u003eGreen Button: Pin 14\u003c\/li\u003e\n\u003cli\u003eBlue Button: Pin 15\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e(*) Pin 0 is used both for Speaker output (using the Music or Tone output methods) as well as the Dial analog input. This causes some compromises - most notable of which is that the Dial analog input cannot reach its normal maximum value of 1023 and stops at around 850 instead. As long as the software understands this, then it shouldn't be a problem.\u003c\/p\u003e\n\u003cp\u003eNB. The Bit:Commander is only powered if batteries are fitted and it is switched on. Powering the micro:bit does not power the Bit:Commander. However, when the Bit:Commander is powered up, then it will also power the micro:bit (\u003ca href=\"https:\/\/smalldevices.com.au\/collections\/micro-bit-starters\/products\/micro-bit\"\u003eavailable separately\u003c\/a\u003e)\u003c\/p\u003e\n\u003ch2\u003eResources:\u003c\/h2\u003e\n\u003cp\u003eSee\u003cspan\u003e the 4Tronix\u003c\/span\u003e\u003ca href=\"https:\/\/4tronix.co.uk\/blog\/?p=1734%20\" target=\"_blank\" title=\"Bit:Commander Blog Post\" rel=\"noopener noreferrer\" data-ss1527500494=\"1\"\u003e Blog Post\u003cspan\u003e \u003c\/span\u003e\u003c\/a\u003efor more information\u003c\/p\u003e\n\u003cp\u003eAlso see Mark Atkinson's excellent site for:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"http:\/\/multiwingspan.co.uk\/micro.php?page=bcpxtintro\" target=\"_blank\" title=\"Block Programming\" rel=\"noopener noreferrer\" data-ss1527500494=\"1\"\u003eBlocks programming\u003cspan\u003e \u003c\/span\u003e\u003c\/a\u003ewith Bit:Commander\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"http:\/\/multiwingspan.co.uk\/micro.php?page=bcintro\" target=\"_blank\" title=\"MicroPython programming\" rel=\"noopener noreferrer\" data-ss1527500494=\"1\"\u003eMicroPython programming\u003cspan\u003e \u003c\/span\u003e\u003c\/a\u003ewith Bit:Commander\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"4tronix","offers":[{"title":"Default Title","offer_id":32901936873604,"sku":"4T-BITCOMMAND","price":44.6,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0368\/0337\/9332\/products\/IMG_1812a_1024x1024_14bc7feb-f618-470c-b1f4-673ad4b4d94f.jpg?v=1584963211"},{"product_id":"right-angled-micro-usb-cable-1m-micro-bit-bit-bot-raspberry-pi-etc","title":"Right-Angled Micro-USB Cable (1m) : micro:bit, Bit:bot, Raspberry Pi, etc.","description":"\u003cmeta charset=\"utf-8\"\u003e\n\u003cp\u003e\u003cstrong\u003eQuality 1m Micro-USB Cable with Right-Angled Connector\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis is ideal to use with the Bit:Bot robot when the Ultrasonic module is attached. It allows you to easily reprogram the BBC micro:bit without removing the ultrasonic sensor\u003c\/p\u003e","brand":"smalldevices","offers":[{"title":"Default Title","offer_id":32901937004676,"sku":"4T-RAUSBLEAD","price":4.95,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0368\/0337\/9332\/products\/usbRA_01_1024x1024_e19aced7-ce41-44b9-9f1a-97b51e20fd31.jpg?v=1584963216"},{"product_id":"4tronix-angle-bit-turn-your-bbc-micro-bit-by-90-degrees-anglebit-for-microbit","title":"4Tronix Angle:Bit - Turn your BBC Micro:Bit by 90 Degrees (AngleBit for MicroBit)","description":"\u003cmeta charset=\"utf-8\"\u003e\n\u003cp\u003e\u003cstrong\u003eThis great little adaptor lets you change the oritentation of your BBC micro:bit from horizontal to vertical, or vice versa.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eAs an added bonus, the edge connector is wired so that you can insert the micro:bit either way round so you can decide whether you want the LEDs facing forwards or backwards (or up or down).\u003c\/p\u003e\n\u003cp\u003eThe design is very compact so it can fit in most accessories. It is particularly useful for \u003ca href=\"https:\/\/smalldevices.com.au\/collections\/robotics\/products\/bit-bot\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eBit:Bot\u003c\/a\u003e as it allows the micro:bit to be accessed easily even when the ultrasonic sensor is fitted.\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/smalldevices.com.au\/collections\/micro-bit-starters\/products\/micro-bit\"\u003eBBC micro:bit\u003c\/a\u003e, \u003ca href=\"https:\/\/smalldevices.com.au\/collections\/robotics\/products\/bit-bot\"\u003eBit:bot\u003c\/a\u003e and Bit:Commander not included.\u003c\/p\u003e","brand":"4tronix","offers":[{"title":"Default Title","offer_id":32901937791108,"sku":"4T-ANGLEBIT","price":11.15,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0368\/0337\/9332\/products\/IMG_1940a_1024x1024_7aaa9120-8995-4ac7-b22d-fa50790844c1.jpg?v=1584963224"},{"product_id":"4tronix-bit-zero-breakout-for-bbc-micro-bit-bitzero-for-microbit","title":"4Tronix Bit:Zero Breakout for BBC Micro:Bit (BitZero for MicroBit)","description":"\u003cmeta charset=\"utf-8\"\u003e\n\u003cp\u003e\u003cstrong\u003eA simple inline breakout board for your BBC micro:Bit. All pins are brought to 3-way header area so you can use the standard GVS (Ground, Volts, Signal) system as used by many sensors and servos and connect them directly.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNB. Header pins are included but not soldered in. Soldering is required if want to use the header pins, or you can wire directly to the pads on the PCB. You can also mount the signal header to the underneath of the PCB so you can plug into a breadboard\u003c\/p\u003e\n\u003cp\u003eThe pins of the \u003ca href=\"https:\/\/smalldevices.com.au\/collections\/micro-bit-starters\"\u003emicro:bit \u003c\/a\u003eare replicated so you can plug the unit into most accessories directly\u003c\/p\u003e\n\u003cp\u003eAs an added bonus, the edge connector is wired so that you can insert the micro:bit either way round so you can decide whether you want the LEDs facing forwards or backwards (or up or down).\u003c\/p\u003e\n\u003cp\u003eBBC micro:bit is not included.\u003c\/p\u003e","brand":"4tronix","offers":[{"title":"Default Title","offer_id":32901939593348,"sku":"4T-BITZERO","price":12.2,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0368\/0337\/9332\/products\/img_2022a_1024x1024_a06d9c13-3f3a-4f0c-b142-d159af6b6c16.jpg?v=1584963237"},{"product_id":"heelight-core","title":"Heelight Core","description":"\u003cmeta charset=\"utf-8\"\u003e\n\u003cp\u003e\u003cstrong\u003eHeelight Core is a smart sound sensor that can recognize up to 500+ digital voice commands.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eHeelight Core is tiny, only 20mm*17mm. By using the design of the stamp hole, you can easily integrate Heelight core into your product. We also provide the component library in Eagle format. And there is a 4-pin header, which can be inserted into a bread board directly to build a prototype.\u003c\/p\u003e\n\u003cp\u003e\u003ciframe src=\"https:\/\/player.vimeo.com\/video\/231215989\" width=\"640\" height=\"360\" frameborder=\"0\" webkitallowfullscreen=\"\" mozallowfullscreen=\"\" allowfullscreen=\"\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003cp\u003eSo what are the advantages of digital sound control?\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThe operation is simple, as long as a device can make a sound, you don't need to connect WiFi, or connect Bluetooth\u003c\/li\u003e\n\u003cli\u003eThere is no compatibility issues. Compare to Bluetooth, WiFi, zigbee, sound is more common\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eUART output (default 9600)\u003c\/li\u003e\n\u003cli\u003eAndroid\/iOS APP\u003c\/li\u003e\n\u003cli\u003e500+ sounds available\u003c\/li\u003e\n\u003cli\u003e3.3V working voltage\u003c\/li\u003e\n\u003cli\u003eSmall Size\u003c\/li\u003e\n\u003cli\u003eWorks with bread board\u003c\/li\u003e\n\u003cli\u003eEasy to be integrated to PCB\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0174\/1800\/files\/Core-5_large.jpg?v=1511536880\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAPP\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/play.google.com\/store\/apps\/details?id=com.heelight.wc.heelightlite\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eAndroid\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/itunes.apple.com\/cn\/app\/heelight-pro-cai-deng-sheng\/id1095593464?mt=8\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eiOS\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"http:\/\/hee.help\/2\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eWep App\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003e(Open it with your smart phone browser)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eReference\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003e\u003ca href=\"http:\/\/docs.longan-labs.cc\/heelight_core\/\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eHow to USE\u003c\/a\u003e\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/shop.pimoroni.com\/products\/heelight-relay\" target=\"_blank\" rel=\"noopener noreferrer\"\u003e\u003cstrong\u003e\u003cem\u003eHeelight Relay\u003c\/em\u003e\u003c\/strong\u003e\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSupport\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003ePlease feel free to contact\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/longan-labs.cc\/heelight-core\/joney.sui@longan-labs.cc\"\u003ejoney.sui@longan-labs.cc\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003eif you need tech support.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cem\u003eReference\u003c\/em\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"http:\/\/docs.longan-labs.cc\/heelight_core\/\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eEagle Library of Heelight Core\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/github.com\/Longan-Labs\/docs_mkdocs\/raw\/master\/docs\/images\/relay\/audio.zip\" target=\"_blank\" rel=\"noopener noreferrer\"\u003e500 sound commands\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"http:\/\/docs.longan-labs.cc\/relay\/\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eHeelight Relay\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Longan Labs","offers":[{"title":"Default Title","offer_id":32901949063300,"sku":"PM-HEELCORE","price":15.95,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0368\/0337\/9332\/products\/Core-2_1024x1024_eb2eacdc-827c-4939-b529-36978f6a2c9b.jpg?v=1584963278"},{"product_id":"flora-color-sensor-with-white-illumination-led-tcs34725","title":"Flora Color Sensor with White Illumination LED - TCS34725","description":"\u003cp\u003e\u003cstrong\u003eYour electronics can now see in dazzling color with this lovely color light sensor. We found the best color sensor on the market, the TCS34725, which has RGB and Clear light sensing elements. An IR blocking filter, integrated on-chip and localized to the color sensing photodiodes, minimizes the IR spectral component of the incoming light and allows color measurements to be made accurately. The filter means you'll get much truer color than most sensors, since humans don't see IR. The sensor also has an incredible 3,800,000:1 dynamic range with adjustable integration time and gain so it is suited for use behind darkened glass or fabric.\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eTo make sure you get consistent color, we specified a nice neutral 4150°K temperature LED with a MOSFET driver onboard to illuminate what you're trying to sense. The LED can be easily turned on during sensing and turned off afterwards to save power.\u003cbr\u003e\u003cbr\u003eConnect to a Flora via I2C and our example code will quickly get you going with 4 channel readings. A detailed tutorial is in the works, till then, \u003ca href=\"https:\/\/github.com\/adafruit\/Adafruit_TCS34725\"\u003echeck out our Arduino library\u003c\/a\u003e and \u003ca href=\"http:\/\/learn.adafruit.com\/adafruit-all-about-arduino-libraries-install-use\"\u003efollow our tutorial to install\u003c\/a\u003e. Sew up the sensor by connecting 3V to 3V Flora output, Ground to common ground, SCL to I2C Clock and SDA to I2C Data on your Flora. All the pins line up and you can chain another sensor such as a lux sensor or accelerometer. Restart the IDE and select the example Flora sketch and start putting all your favorite fruit next to the sensor element!\u003cbr\u003e\u003cbr\u003e\u003ciframe alt=\"\/\/www.youtube.com\/embed\/xZ8z1IgKhNE?rel=0\u0026amp;start=1341\u0026amp;autoplay=0\" class=\"video-insert\" src=\"\/\/www.youtube.com\/embed\/xZ8z1IgKhNE?rel=0\u0026amp;start=1341\u0026amp;autoplay=0\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003cp\u003eFlora Color Sensor - TCS34725 (\u003ca href=\"https:\/\/www.youtube.com\/watch?feature=player_detailpage\u0026amp;v=xZ8z1IgKhNE#t=1341\"\u003e22:21\u003c\/a\u003e)\u003c\/p\u003e\n,\n\u003cdiv class=\"panel-collapse collapse in-md in-lg \" id=\"technical-details\"\u003e\n\u003ca class=\"invizzy-anchor\" id=\"technical-details-anchor\" name=\"technical-details\"\u003e\u003c\/a\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"col-lg-12 col-md-12 col-sm-12 col-xs-12\"\u003e\n\u003cul\u003e\n\u003cli\u003eWeight: 0.39g\u003c\/li\u003e\n\u003cli\u003eDimensions: 15.25mm \/ 0.6\" x 15.25mm \/ 0.6\" x 2.16mm \/ 0.08\"\u003c\/li\u003e\n\u003cli\u003eThis board\/chip uses I2C 7-bit address 0x29\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/learn.adafruit.com\/adafruit-color-sensors\/downloads\"\u003eDatasheets, EagleCAD PCB files, and Fritzing library available in the color sensor tutorial\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"col-lg-12 col-md-1 col-sm-1 col-xs-2\"\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cul id=\"product-files\"\u003e\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Adafruit","offers":[{"title":"Default Title","offer_id":32901951193220,"sku":"ADA-1356","price":18.45,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0368\/0337\/9332\/products\/1356-00.jpg?v=1584963290"},{"product_id":"kitronik-move-mini-line-following-add-on","title":"Kitronik :MOVE mini Line Following Add-on","description":"\u003cmeta content=\"text\/html; charset=utf-8\" http-equiv=\"content-type\"\u003e\n\u003cp\u003e\u003cstrong\u003eAdd line following functionality to the Kitronik :\u003ca href=\"https:\/\/smalldevices.com.au\/collections\/micro-bit-accessories\/products\/kitronik-move-mini-buggy-kit-for-bbc-micro-bit\"\u003eMOVE mini for the BBC micro:bit\u003c\/a\u003e with this easy to assemble add-on kit.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNOTE: This current add-on is not compatible with the :MOVE mini buggy MK2, but a new model will be in stock for these soon.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis add-on comes with all the parts required to add line following functionality to the :MOVE mini and does not require any soldering. Once built, the sensitivity of the left and right sensors can be individually tweaked to ensure smooth operation.\u003c\/p\u003e\n\u003cp\u003eSee the resource section below to download the line following code example we created. By default the code will cause the buggy to follow a dark line on a light background but the code can be altered to do the opposite.\u003c\/p\u003e\n\u003cp\u003eThere is no soldering required but the kit does require some mechanically assembly.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAdd line following functionality to the :MOVE mini for the BBC micro:bit.\u003c\/li\u003e\n\u003cli\u003eCan either follow a dark line on a light back ground or a light line on a dark background.\u003c\/li\u003e\n\u003cli\u003eThe line following sensitivity can be adjusted with a screwdriver.\u003c\/li\u003e\n\u003cli\u003eNo Soldering required.\u003c\/li\u003e\n\u003cli\u003eExample line following code is provided.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eContents:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e1 x\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/smalldevices.com.au\/collections\/micro-bit-accessories\/products\/kitronik-move-sensor-interface-board-for-the-bbc-micro-bit\"\u003e:MOVE Sensor Interface for the BBC micro:bit\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003e1 x\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/smalldevices.com.au\/collections\/micro-bit-accessories\/products\/kitronik-line-following-board\"\u003e:MOVE Line Following board for the BBC micro:bit\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003e1 x\u003cspan\u003e \u003c\/span\u003eConnector Cable.\u003c\/li\u003e\n\u003cli\u003e2 x\u003cspan\u003e \u003c\/span\u003eCS M3 8mm Screws.\u003c\/li\u003e\n\u003cli\u003e2 x\u003cspan\u003e \u003c\/span\u003eM3 Hex Full Width Nut.\u003c\/li\u003e\n\u003cli\u003e5 x\u003cspan\u003e \u003c\/span\u003eCS M3 12mm Screws.\u003c\/li\u003e\n\u003cli\u003e2 x 5\u003cspan\u003e \u003c\/span\u003ePCB pin headers.\u003c\/li\u003e\n\u003cli\u003e1 x small Kitronik keyring.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eVideo:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cdiv class=\"youtube video-container\"\u003e\u003ciframe width=\"480\" height=\"270\" src=\"https:\/\/www.youtube.com\/embed\/zHKukgmh6DA\" frameborder=\"0\" allow=\"autoplay; encrypted-media\" allowfullscreen=\"\"\u003e\u003c\/iframe\u003e\u003c\/div\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eRequires:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e1 x\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/smalldevices.com.au\/products\/kitronik-move-mini-buggy-kit-for-bbc-micro-bit\"\u003e:MOVE mini buggy kit\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003e1 x\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/smalldevices.com.au\/collections\/micro-bit-starters\/products\/micro-bit\"\u003eBBC micro:bit\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003e1 x\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/smalldevices.com.au\/collections\/micro-bit-accessories\/products\/usb-a-to-microb-cable-black\"\u003eMicro USB Cable\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003e1 x Small flat bladed\u003cspan\u003e \u003c\/span\u003escrewdriver.\u003c\/li\u003e\n\u003cli\u003e1 x Small phillips\u003cspan\u003e \u003c\/span\u003escrewdriver.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eResources:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/www.kitronik.co.uk\/zip\/microbit-Line-Follower.zip\"\u003eLine Following Code HEX file\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca title=\"Line Follower Assembly Instructions\" href=\"https:\/\/www.kitronik.co.uk\/pdf\/5629-move-line-following-board-microbit-assembly-instructions.pdf\"\u003eLine Follower Assembly Instructions\u003c\/a\u003e.\u003cimg src=\"https:\/\/www.kitronik.co.uk\/pdf\/pdf_icon.gif\" alt=\"pdf_icon.gif\" width=\"25\" height=\"24\"\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003ca title=\"Sensor Interface Assembly Instructions\" href=\"https:\/\/www.kitronik.co.uk\/pdf\/5628-move-sensor-interface-board-microbit-assembly-instructions.pdf\"\u003eSensor Interface board Assembly Instructions\u003c\/a\u003e.\u003cimg src=\"https:\/\/www.kitronik.co.uk\/pdf\/pdf_icon.gif\" alt=\"pdf_icon.gif\" width=\"25\" height=\"24\"\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003ca title=\"Line Follower Datasheet\" href=\"https:\/\/www.kitronik.co.uk\/pdf\/5629-move-line-following-board-microbit-datasheet.pdf\"\u003eLine Follower Datasheet\u003c\/a\u003e.\u003cimg src=\"https:\/\/www.kitronik.co.uk\/pdf\/pdf_icon.gif\" alt=\"pdf_icon.gif\" width=\"25\" height=\"24\"\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Kitronik Ltd","offers":[{"title":"Default Title","offer_id":32901956796548,"sku":"KT-5624-lf","price":24.4,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0368\/0337\/9332\/products\/5624-lf_press-line_following-add-on-move-mini-microbit.jpg?v=1584963309"},{"product_id":"kitronik-line-following-board","title":"Kitronik Line Following Board","description":"\u003cmeta content=\"text\/html; charset=utf-8\" http-equiv=\"content-type\"\u003e\n\u003cp\u003e\u003cstrong\u003eAdd line following to your BBC \u003ca href=\"https:\/\/www.kitronik.co.uk\/microbit.html\"\u003emicrobit\u003c\/a\u003e Robot\/buggy projects with this Line Following Board for BBC micro:bit.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cmeta charset=\"utf-8\"\u003e\n\u003cp\u003e\u003cstrong\u003eNOTE: This current add-on is not compatible with the :MOVE mini buggy MK2, but a new model will be in stock for these soon.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eAlthough designed with the :MOVE mini in mind, this board can be used to add line following to any micro:bit buggy. If adding line following to the :MOVE mini, \u003cem\u003eyou will need the \u003ca href=\"https:\/\/smalldevices.com.au\/collections\/micro-bit-accessories\/products\/kitronik-move-mini-line-following-add-on\"\u003eLine Following add-o for the :MOVE mini,\u003c\/a\u003e instead.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003eThe board can be used to either follow a dark line on a light back ground or a light line on a dark background. For best results, ensure there is approx. 5mm clearance between the bottom of the board and the driving surface.\u003c\/p\u003e\n\u003cp\u003eThe sensitivity of the line following can be adjusted via the two on-board pots, one for each detector. The same pots are also used to change the type of line that will be followed; to detect darker, turn the pot clockwise and to detect lighter, turn the pot anti-clockwise.\u003c\/p\u003e\n\u003cp\u003eThe board has an operating voltage (Vcc) of 3V and is rated for a max current of less than 1mA.\u003c\/p\u003e\n\u003cp\u003eThere are two output channels via a 5 pin output that has the following configuration; 0V \/ Left Detector \/ 3V \/ Right Detector \/ 0V.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAdd line following to your microbit Robot\/buggy.\u003c\/li\u003e\n\u003cli\u003eCan be attached directly to the underside of the :MOVE mini.\u003c\/li\u003e\n\u003cli\u003eCan either follow a dark line on a light back ground or a light line on a dark background.\u003c\/li\u003e\n\u003cli\u003eThe line following sensitivity can be adjusted with a screwdriver.\u003c\/li\u003e\n\u003cli\u003eNo Soldering required.\u003c\/li\u003e\n\u003cli\u003eExample line following code is provided.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eContents:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e1 x :MOVE Line Following board for the BBC micro:bit.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eDimensions:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eLength: 43.7mm.\u003c\/li\u003e\n\u003cli\u003eWidth: 31.5mm.\u003c\/li\u003e\n\u003cli\u003eMax height: 5.7mm\u003c\/li\u003e\n\u003cli\u003ePin Header Pitch: 2.54mm.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eRequires:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e1 x\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/smalldevices.com.au\/collections\/micro-bit-starters\/products\/micro-bit\"\u003eBBC micro:bit\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003e1 x Small flat bladed\u003cspan\u003e \u003c\/span\u003escrewdriver.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eResources:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/www.kitronik.co.uk\/zip\/microbit-Line-Follower.zip\"\u003eLine Following Code HEX file\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca title=\"Line Follower Datasheet\" href=\"https:\/\/www.kitronik.co.uk\/pdf\/5629-move-line-following-board-microbit-datasheet.pdf\"\u003eLine Follower Datasheet\u003c\/a\u003e.\u003cimg src=\"https:\/\/www.kitronik.co.uk\/pdf\/pdf_icon.gif\" alt=\"pdf_icon.gif\" width=\"25\" height=\"24\"\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003ca title=\"Line Follower Assembly Instructions\" href=\"https:\/\/www.kitronik.co.uk\/pdf\/5629-move-line-following-board-microbit-assembly-instructions.pdf\"\u003eLine Follower Assembly Instructions\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003eto show how you might use it.\u003cimg src=\"https:\/\/www.kitronik.co.uk\/pdf\/pdf_icon.gif\" alt=\"pdf_icon.gif\" width=\"25\" height=\"24\"\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Kitronik Ltd","offers":[{"title":"Default Title","offer_id":32901961023620,"sku":"KT-5629","price":14.5,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0368\/0337\/9332\/products\/5629_large-line-following-board-microbit.jpg?v=1584963328"},{"product_id":"kitronik-move-sensor-interface-board-for-the-bbc-micro-bit","title":"Kitronik :MOVE Sensor Interface Board for the BBC micro:bit","description":"\u003cmeta content=\"text\/html; charset=utf-8\" http-equiv=\"content-type\"\u003e\n\u003cp\u003e\u003cstrong\u003eExpand the scope of your :MOVE mini Robotics projects to include sensory input via the Kitronik :MOVE Sensor Interface Board for the BBC \u003ca href=\"https:\/\/smalldevices.com.au\/collections\/micro-bit-starters\"\u003emicrobit\u003c\/a\u003e.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe board acts as a breakout board for the micro:bit while it is attached to a Servo:Lite board and allows you to add things such as line following boards, ultrasonic sensors, and much more.\u003c\/p\u003e\n\u003cp\u003eSensory input can allow for your projects to become more autonomous as they react to their surroundings and perform actions based on this.\u003c\/p\u003e\n\u003cp\u003eThere is no soldering required, the board is screwed directly to the BBC microbit and Servo:Lite assembly with the five screws that are supplied with the board.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAdd external sensor input to the BBC microbit.\u003c\/li\u003e\n\u003cli\u003eExpand the scope and function of your :MOVE mini Robots.\u003c\/li\u003e\n\u003cli\u003eBreaks out the BBC micro:bits.\u003c\/li\u003e\n\u003cli\u003eAdding sensors to :MOVE mini allows it to react to its environment.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eContents:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e1 x :MOVE Sensor Interface for the BBC micro:bit.\u003c\/li\u003e\n\u003cli\u003e5 x\u003cspan\u003e \u003c\/span\u003eCS M3 12mm Screws.\u003c\/li\u003e\n\u003cli\u003e2 x 5\u003cspan\u003e \u003c\/span\u003ePCB pin headers.\u003c\/li\u003e\n\u003cli\u003e1 x small Kitronik keyring.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eDimensions:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMax Height: 48mm.\u003c\/li\u003e\n\u003cli\u003eMax Width: 52mm.\u003c\/li\u003e\n\u003cli\u003ePCB Thickness: 1.5mm.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eRequires:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e1 x\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/smalldevices.com.au\/collections\/micro-bit-accessories\/products\/kitronik-move-mini-buggy-kit-for-bbc-micro-bit\"\u003e:MOVE mini buggy kit\u003c\/a\u003e.\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003eOr 1 x\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/smalldevices.com.au\/collections\/micro-bit-accessories\/products\/kitronik-servo-lite-board-for-the-bbc-micro-bit\"\u003eServo:Lite board\u003c\/a\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cli\u003e1 x\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/smalldevices.com.au\/collections\/micro-bit-accessories\/products\/usb-a-to-microb-cable-black\"\u003eMicro USB Cable\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003e1 x Small Phillips Screwdriver.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eResources:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ca title=\"Sensor Interface Assembly Instructions\" href=\"https:\/\/www.kitronik.co.uk\/pdf\/5628-move-sensor-interface-board-microbit-assembly-instructions.pdf\"\u003eSensor Interface board Assembly Instructions\u003c\/a\u003e.\u003cimg src=\"https:\/\/www.kitronik.co.uk\/pdf\/pdf_icon.gif\" alt=\"pdf_icon.gif\" width=\"25\" height=\"24\"\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Kitronik Ltd","offers":[{"title":"Default Title","offer_id":32901961646212,"sku":"KT-5628","price":13.55,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0368\/0337\/9332\/products\/5628_press-sensor-interface-board-move-mini-microbit.jpg?v=1584963336"},{"product_id":"4tronix-robohat-robot-controller-for-raspberry-pi","title":"4tronix RoboHAT Robot Controller for Raspberry Pi","description":"\u003cmeta content=\"text\/html; charset=utf-8\" http-equiv=\"content-type\"\u003e\n\u003cp align=\"left\"\u003e\u003cstrong\u003e\u003cspan\u003eRoboHAT - Complete Robotics Controller for Raspberry Pi\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003eSupports all models of Raspberry Pi with 40 pin Connector: Model A+\/B+ as well as Pi 2 and 3 Model B\u003cbr\u003e\u003cbr\u003eProgramming is fully supported in both Python and Scratch GPIO\u003cbr\u003e\u003cbr\u003eThis is the replacement for the Pirocon\u003c\/strong\u003e\u003cbr\u003e \u003c\/p\u003e\n\u003cp align=\"left\"\u003e\u003cb\u003eRoboHAT\u003cspan\u003e \u003c\/span\u003e\u003c\/b\u003eis a complete robotics controller for your Raspberry Pi based mobile robot. Just look at the features provided in this small board:\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eFully HAT specification compliant\u003c\/li\u003e\n\u003cli\u003e5V switching regulator to safely power the robot and the Pi from 7V to 10V batteries\u003c\/li\u003e\n\u003cli\u003eLED indication of 5V power status\u003c\/li\u003e\n\u003cli\u003eHigh efficiency, dual H-Bridge driver to drive 2 DC motors (or 2 sets of 2 if using paired motors on each side of the robot)\u003c\/li\u003e\n\u003cli\u003e6, 5V level shifted GPIO inputs with GVS 3-pin connectors (Ground, Volts, Signal)\u003c\/li\u003e\n\u003cli\u003e4, 5V level shifted GPIO outputs with GVS 3-pin connectors\u003c\/li\u003e\n\u003cli\u003e4-pin male header to directly plug in an Ultrasonic distance sensor. Only uses a single pin on the Raspberry Pi GPIO\u003c\/li\u003e\n\u003cli\u003eOptional separate power for motors (up to 11V and 1.5A per motor)\u003c\/li\u003e\n\u003cli\u003eThe output connectors can be used directly to drive servos\u003c\/li\u003e\n\u003cli\u003eI2C breakout connector (standard 4tronix I2C port)\u003c\/li\u003e\n\u003cli\u003eIncludes 2 mounting pillars and screws so it can be securely mounted to your Raspberry Pi\u003c\/li\u003e\n\u003cli\u003eAll of this is directly supported in Scratch GPIO 4 onwards - many thanks to Simon Walters for some excellent work\u003c\/li\u003e\n\u003cli\u003ePython library module and examples freely available\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cspan\u003eThis controller board is supplied fully assembled. No soldering is required.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eSee \u003c\/span\u003e\u003ca href=\"http:\/\/4tronix.co.uk\/blog\/?p=1196\" data-ss1522240042=\"1\"\u003ethe Blog entry\u003cspan\u003e \u003c\/span\u003e\u003c\/a\u003e\u003cspan\u003efor more information, software and example\u003c\/span\u003e","brand":"4tronix","offers":[{"title":"Default Title","offer_id":32901966430340,"sku":"4T-ROBOTHAT","price":54.8,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0368\/0337\/9332\/products\/1.jpg?v=1584963353"},{"product_id":"4tronix-bit-bot-pen-holder","title":"4Tronix Bit:Bot Pen Holder","description":"\u003cmeta charset=\"utf-8\"\u003e\n\u003cp\u003e\u003cstrong\u003eThis item is due to be discontinued once existing stock runs out - the newer version can be \u003ca href=\"https:\/\/smalldevices.com.au\/collections\/all\/products\/4tronix-pen-holder-mk2-for-bitbot\" title=\"Bitbot pen holder mk2 in Australia at Small Devices\"\u003efound here.\u003c\/a\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eNB. Bit:Bot not included\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis nifty little, and extremely thin, PCB allows you to connect a pen to the back of your Bit:Bot\u003c\/span\u003e\u003cspan\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003eOnly 0.4mm thin, so it is very flexible, allowing it to put downwards pressure on the pen without pushing the robot off the ground\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eRubber grommet with 10mm internal diameter - ideal for Sharpie felt tips and other pens\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eEasily fitted onto the two screws for the battery support pillars in seconds\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e\u003cspan\u003eThis accessory is available in 2 flavours:\u003c\/span\u003e\u003cspan\u003e\u003c\/span\u003e\n\u003col\u003e\n\u003cli\u003e\u003cspan\u003ePlain PCB with rubber grommet for maximum economy\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eFitted with 8 bright white LEDs to produce a glow-ring effect on the top and lighting the drawing below\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cbr\u003e\u003cbr\u003e","brand":"4Tronix","offers":[{"title":"LEDs","offer_id":32901970329732,"sku":"4T-BOTPENxx-1","price":10.5,"currency_code":"EUR","in_stock":true},{"title":"No LEDs","offer_id":32901970395268,"sku":"4T-BOTPENxx-2","price":5.7,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0368\/0337\/9332\/products\/bbpen1.jpg?v=1584963380"},{"product_id":"kitronik-tipper-trailer-add-on-for-the-move-mini","title":"Kitronik Tipper Trailer Add-On for the :MOVE MINI","description":"\u003cmeta charset=\"utf-8\"\u003e\n\u003cp\u003e\u003cstrong\u003eWith this Tipper Truck add-on for \u003ca href=\"https:\/\/smalldevices.com.au\/collections\/micro-bit-accessories\/products\/kitronik-move-mini-buggy-kit-for-bbc-micro-bit\"\u003e:MOVE mini for the BBC microbit\u003c\/a\u003e, everyone's favourite little programmable robot buggy just got much better. Robots often do more than just :MOVE from A to B, and with this add-on so can :MOVE mini.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNOTE: This add-on is only for the :MOVE mini MK1 - you can\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/smalldevices.com.au\/collections\/kitronik-ltd\/products\/tipper-trailer-add-on-for-move-mini-mk2\" title=\"Kitronik Tipper add-on for the :MOVE mini bugger Mk2 in Australia from Smalldevices\"\u003efind the new MK2 here.\u003c\/a\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003ePreviously on :MOVE mini, we; drew shapes, controlled it via bluetooth, controlled it with a second\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/smalldevices.com.au\/collections\/micro-bit-starters\/products\/micro-bit-essentials-kit\"\u003emicrobit\u003c\/a\u003e, and we also coded a variety of light shows. Now, it can totally carry and dump stuff too!\u003c\/p\u003e\n\u003cp\u003eThis self assembly Tipper Truck add-on kit is made from the same materials as :MOVE mini, designed in keeping with the :MOVE mini aesthetic, and also comes with the servo required to move the Tipper Truck trailer up and down.\u003c\/p\u003e\n\u003cp\u003eThere is a very simple\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/smalldevices.com.au\/collections\/micro-bit-accessories\/products\/kitronik-servo-lite-board-for-the-bbc-micro-bit\"\u003eServo:Lite\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003eboard hack that enables the control of the third servo, you can\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/www.kitronik.co.uk\/blog\/3-servos-with-the-servolite-board\/\"\u003efind out how here\u003c\/a\u003e. Once the kit is fully assembled, the Tipper Truck can be coded with the Microsoft\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/www.kitronik.co.uk\/blog\/getting-started-microsoft-makecode-editor\/\"\u003eMakeCode Editor\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNote: In order to use this accessory you must enable the third servo functionality to be able to connect the third servo to the Servo:Lite board, some soldering is required in order to do this. The header pins required for this are supplied with this kit. Also, enabling the third servo disables the onboard ZIP LEDs. If you undo the third servo hack and return the board to its original state, the onboard ZIP LEDs will be re-enabled. We have produced a short guide showing how to enable the third servo and how to revert this change,\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/www.kitronik.co.uk\/blog\/3-servos-with-the-servolite-board\/\"\u003eread it here\u003c\/a\u003e.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThis kit requires mechanical assembly.\u003c\/li\u003e\n\u003cli\u003eThis kit requires some soldering.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eWhen attached to :MOVE mini this kit offers a fun introduction to the world of DIY robotics.\u003c\/li\u003e\n\u003cli\u003eCode it with the Microsoft\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/makecode.microbit.org\/\"\u003eMakeCode Editor\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003eUse in conjunction with an App and control it over Bluetooth.\u003c\/li\u003e\n\u003cli\u003eUse the radio function and a second microbit as a controller.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eContents:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e1 x Set of Tipper Truck parts.\u003c\/li\u003e\n\u003cli\u003e1 x\u003cspan\u003e \u003c\/span\u003eMini 180 Degree Servo.\u003c\/li\u003e\n\u003cli\u003e8 x\u003cspan\u003e \u003c\/span\u003eM2 6mm Pan head steel screw.\u003c\/li\u003e\n\u003cli\u003e5 x\u003cspan\u003e \u003c\/span\u003eM2 16mm Pan head steel screw.\u003c\/li\u003e\n\u003cli\u003e8 x\u003cspan\u003e \u003c\/span\u003eM2 Hex Full width nut.\u003c\/li\u003e\n\u003cli\u003e2 x\u003cspan\u003e \u003c\/span\u003e6mm Counter sunk M3 screw.\u003c\/li\u003e\n\u003cli\u003e2 x\u003cspan\u003e \u003c\/span\u003e10mm Counter sunk M3 screw.\u003c\/li\u003e\n\u003cli\u003e2 x\u003cspan\u003e \u003c\/span\u003eM3 Washers.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eDimensions:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eLength: 100mm.\u003c\/li\u003e\n\u003cli\u003eWidth: 65mm.\u003c\/li\u003e\n\u003cli\u003eHeight: 61mm.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eVideo:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cdiv class=\"youtube video-container\"\u003e\u003ciframe width=\"480\" height=\"270\" src=\"https:\/\/www.youtube.com\/embed\/lKl3wklqTNc\" frameborder=\"0\" allow=\"autoplay; encrypted-media\" allowfullscreen=\"\" data-ss1519091279=\"1\"\u003e\u003c\/iframe\u003e\u003c\/div\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eRequires:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e1 x\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/smalldevices.com.au\/collections\/micro-bit-accessories\/products\/kitronik-move-mini-buggy-kit-for-bbc-micro-bit\"\u003e:MOVE mini for the BBC microbit kit\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003e1 x\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/smalldevices.com.au\/collections\/micro-bit-starters\/products\/micro-bit\"\u003eBBC microbit\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003eScrewdriver.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eResources:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/www.kitronik.co.uk\/zip\/microbit-tipper-and-bulldozer-example-code-using-microbit-radio.zip\"\u003eExample code and usage instructions\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/www.kitronik.co.uk\/blog\/kitronik-custom-makecode-editor-servo-blocks\/\"\u003eGuide For Kitronik Custom MakeCode Editor Servo Blocks\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/www.kitronik.co.uk\/blog\/getting-started-servolite-board-microbit\/\"\u003eGetting Started With The Servo:Lite board\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/www.kitronik.co.uk\/blog\/3-servos-with-the-servolite-board\/\"\u003eGuide For Controlling 3 Servos With The Servo:Lite board\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/www.kitronik.co.uk\/blog\/move-mini-microbit-radio\/\"\u003eGuide for Controlling :MOVE mini With The microbit Radio\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/www.kitronik.co.uk\/blog\/adding-bluetooth-remote-control-move-mini\/\"\u003eGuide For Adding Bluetooth Remote Control To :MOVE mini\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca title=\"WS2812B Datasheet\" href=\"https:\/\/www.kitronik.co.uk\/pdf\/WS2812B-LED-datasheet.pdf\"\u003eWS2812B Datashee\u003c\/a\u003et.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca title=\"servo:lite Datasheet\" href=\"https:\/\/www.kitronik.co.uk\/pdf\/5623-servo-lite-datasheet.pdf\"\u003eServo:Lite board Datashee\u003c\/a\u003et\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Kitronik Ltd","offers":[{"title":"Default Title","offer_id":32901972918404,"sku":"KT-5624-TT","price":23.65,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0368\/0337\/9332\/products\/5624-tt_large-tipper-trailer-move-mini.jpg?v=1584963391"},{"product_id":"standard-servo-towerpro-sg-5010-5010","title":"Standard servo - TowerPro SG-5010 - 5010","description":"\u003cp\u003e\u003cstrong\u003eThis high-torque standard servo can rotate approximately 180 degrees (90 in each direction). You can use any servo code, hardware or library to control these servos. Good for beginners who want to make stuff move without building a motor controller with feedback \u0026amp; gear box. Comes with 3 horns, as shown. They aren't the highest quality servo (which is why they are less expensive) and so are not suggested for hobby planes.\u003c\/strong\u003e\u003cbr\u003e \u003cbr\u003e To control with an Arduino, we suggest connecting the orange control wire to pin 9 or 10 and using the \u003ca href=\"http:\/\/www.arduino.cc\/en\/Reference\/Servo\"\u003eServo library\u003c\/a\u003e included with the Arduino IDE (\u003ca href=\"http:\/\/arduino.cc\/en\/Tutorial\/Sweep\"\u003esee here for an example sketch\u003c\/a\u003e). Position \"0\" (1.5ms pulse) is middle, \"90\" (~2ms pulse) is all the way to the right, \"-90\" (~1ms pulse) is all the way to the left.\u003c\/p\u003e\n,\n\u003cdiv class=\"panel-collapse collapse in-md in-lg \" id=\"technical-details\"\u003e\n\u003ca class=\"invizzy-anchor\" id=\"technical-details-anchor\" name=\"technical-details\"\u003e\u003c\/a\u003e\n\u003cp\u003eDetails:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePower: 4.8V - 6V DC max (5V works well)\u003c\/li\u003e\n\u003cli\u003eAverage Speed: 0.2sec\/60degree (@ 4.8V), 0.16sec\/60degree (@ 6V)\u003c\/li\u003e\n\u003cli\u003eWeight: 39g (1.37 oz)\u003c\/li\u003e\n\u003cli\u003eTorque: At 5V, 5.5kg-cm \/ 76oz-in, and at 6V 6.5kg-cm \/ 90oz-in.\u003c\/li\u003e\n\u003cli\u003eSize mm: (L x W x H) 40 x 20.0 x 38 mm\u003c\/li\u003e\n\u003cli\u003eSize in: (L x W x H) 1.60x.79x1.50\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 20.8px;\"\u003eSpline Count: 25\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul id=\"product-files\"\u003e\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Adafruit","offers":[{"title":"Default Title","offer_id":32901998739588,"sku":"ADA-155","price":20.4,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0368\/0337\/9332\/products\/155-01.jpg?v=1584963491"},{"product_id":"kitronik-16-servo-driver-board-for-the-bbc-micro-bit","title":"Kitronik 16 Servo Driver Board for the BBC micro:bit","description":"\u003cmeta charset=\"utf-8\"\u003e\n\u003cp\u003e\u003cstrong\u003eTake your robotics project to the next level with the Kitronik I2C Servo Driver Board for the BBC micro:bit.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCapable of controlling 16 servos which are powered directly from the board's power supply. The board can be powered either through the terminal blocks or the on-board header for radio control receiver packs.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYou can also purchase \u003ca href=\"https:\/\/smalldevices.com.au\/collections\/kits\/products\/kitronik-16-servo-driver-board-micro-bit-combo-with-16-micro-180-servos\" title=\"Kitronik 16 servo board complete with servos and battery cage.\"\u003eour combo that includes this board with 16 compatible micro servos, and battery cage\u003c\/a\u003e to power them.\u003c\/p\u003e\n\u003cp\u003eThe \u003ca href=\"https:\/\/smalldevices.com.au\/products\/mini-180-degree-servo-with-accessories\" title=\"FeeTech Micro Servo 180 degree with cable and accessories\"\u003eservos + accessories and cable, are also available individually.\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eThe pins from the BBC micro:bit are broken out to pads on the end of the Servo Driver Board, in accordance with the Link Standard for BBC micro:bit accessories.\u003c\/p\u003e\n\u003cp\u003eThese pads can either be soldered onto directly, or they are the correct spacing for our PCB pin headers (see image below for a close up of the pads).\u003c\/p\u003e\n\u003cp\u003e \u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/1595\/0669\/files\/5612_description_kitronik_i2c_servo_driver_board__microbit_1024x1024.gif?v=1538794236\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eInput voltage 3V - 5.5V.\u003c\/li\u003e\n\u003cli\u003eDrive up to 16 servo motors.\u003c\/li\u003e\n\u003cli\u003eServos take power directly from the board power supply.\u003c\/li\u003e\n\u003cli\u003eStandard 0.1\" pitch servo connectors.\u003c\/li\u003e\n\u003cli\u003eTerminal blocks for easy connection of power.\u003c\/li\u003e\n\u003cli\u003eIncludes Edge Connector for the BBC micro:bit to slot into.\u003c\/li\u003e\n\u003cli\u003eLink Standard compatible.\u003c\/li\u003e\n\u003cli\u003eAccess the other BBC micro:bit pins easily and conveniently.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eDimensions:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eLength: 67.4mm.\u003c\/li\u003e\n\u003cli\u003eWidth: 62mm.\u003c\/li\u003e\n\u003cli\u003eHeight: 16mm.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eVideo:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/5iEjguxN9q4\" frameborder=\"0\" allow=\"autoplay; encrypted-media\" allowfullscreen=\"\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eRequires:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePSU, battery cage with leads, or radio receiver battery pack.\u003c\/li\u003e\n\u003cli\u003e1 x BBC\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/smalldevices.com.au\/collections\/micro-bit-starters\/products\/micro-bit\"\u003emicrobit\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/smalldevices.com.au\/search?q=servo\" target=\"_blank\" title=\"Servos available in Australia at Small Devices\" rel=\"noopener noreferrer\"\u003eServos.\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003eScrewdriver.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eResources:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/github.com\/KitronikLtd\/micropython-microbit-kitronik-16-servo-board\"\u003eMicroPython example code\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca title=\"5612 - Kitronik I2C Servo Driver Board Datasheet\" href=\"https:\/\/www.kitronik.co.uk\/pdf\/5612-kitronik-i2c-servo-driver-board-microbit-datasheet.pdf\"\u003eDatasheet\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Kitronik Ltd","offers":[{"title":"Default Title","offer_id":32902010732676,"sku":"KT-16SERVO","price":27.2,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0368\/0337\/9332\/products\/5612_large_kitronik_i2c_servo_driver_board_microbit.jpg?v=1584963541"},{"product_id":"adafruit-pioled-128x32-monochrome-oled-add-on-for-raspberry-pi","title":"Adafruit PiOLED - 128x32 Monochrome OLED Add-on for Raspberry Pi","description":"\u003cmeta charset=\"utf-8\"\u003e\n\u003cp\u003e\u003cstrong\u003eIf you're looking for the most compact li'l display for a \u003ca href=\"https:\/\/smalldevices.com.au\/collections\/raspberry-pi\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eRaspberry Pi\u003c\/a\u003e (most likely a \u003ca href=\"https:\/\/smalldevices.com.au\/collections\/raspberry-pi-zero\"\u003ePi Zero\u003c\/a\u003e) project, this might be just the thing you need!\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe\u003cstrong\u003e\u003cspan\u003e \u003c\/span\u003eAdafruit 128x32 PiOLED\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eis your little OLED pal, ready to snap onto any and all Raspberry Pi computers, to give you a little display. The PiOLED comes with a monochrome 128x32 OLED, with sharp white pixels. The OLED uses only the I2C pins so you have plenty of GPIO connections available for buttons, LEDs, sensors, etc. It's also nice and compact so it will fit into any case.\u003c\/p\u003e\n\u003cp\u003eThese displays are small, only about 1\" diagonal, but very readable due to the high contrast of an OLED display. This screen is made of 128x32 individual white OLED pixels and because the display makes its own light, no backlight is required. This reduces the power required to run the OLED and is why the display has such high contrast; we really like this miniature display for its crispness!\u003c\/p\u003e\n\u003cp\u003eUsing the display is very easy, we have a Python library for the SSD1306 chipset. Our example code allows you to draw images, text, whatever you like, using the Python imaging library. Our tests showed 30 FPS update rates so you can do animations or simple video.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eComes completely pre-assembled and tested\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eso you don't need to do anything but plug it in and install our Python code! Works with any Raspberry Pi computer, including the original Pi 1, B+, Pi 2, Pi 3 and Pi Zero.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003ca href=\"https:\/\/learn.adafruit.com\/adafruit-pioled-128x32-mini-oled-for-raspberry-pi\/\"\u003eInstructions, software, downloads and more in the Learning Guide!\u003c\/a\u003e\u003c\/strong\u003e\u003c\/p\u003e","brand":"Adafruit","offers":[{"title":"Default Title","offer_id":32902022234244,"sku":"ADA-3527","price":24.45,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0368\/0337\/9332\/products\/3527-02.jpg?v=1584963585"},{"product_id":"adafruit-trinket-m0-for-use-with-circuitpython-arduino-ide","title":"Adafruit Trinket M0 - for use with CircuitPython \u0026 Arduino IDE","description":"\u003cmeta charset=\"utf-8\"\u003e\n\u003cp\u003eThe Adafruit Trinket M0 may be small, but do not be fooled by its size! It's a tiny microcontroller board, built around the Atmel ATSAMD21, a little chip with\u003cspan\u003e \u003c\/span\u003e\u003cem\u003ea lot\u003c\/em\u003e\u003cspan\u003e \u003c\/span\u003eof power. We wanted to design a microcontroller board that was small enough to fit into any project, and low cost enough to use without hesitation. Perfect for when you don't want to give up your expensive dev-board and you aren't willing to take apart the project you worked so hard to design. It's our lowest-cost CircuitPython programmable board!\u003c\/p\u003e\n\u003cp\u003eWe've taken the same form factor we used for \u003ca href=\"https:\/\/www.adafruit.com\/product\/1500\"\u003ethe original ATtiny85-based Trinket\u003c\/a\u003e and gave it an upgrade. The Trinket M0 has swapped out the lightweight ATtiny85 for a ATSAMD21E18 powerhouse. It's just as small, and it's easier to use, so you can do more.\u003c\/p\u003e\n\u003cp\u003eThe most exciting part of the Trinket M0 is that while you can use it with the Arduino IDE, we are shipping it with CircuitPython on board. When you plug it in, it will show up as a very small disk drive with main.py on it. Edit main.py with your favorite text editor to build your project using Python, the most popular programming language. No installs, IDE or compiler needed, so you can use it on any computer, even ChromeBooks or computers you can't install software on. When you're done, unplug the Trinket M0 and your code will go with you.\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/learn.adafruit.com\/adafruit-trinket-m0-circuitpython-arduino\/circuitpython\"\u003ePlease check out the Trinket M0 CircuitPython guide for a list of capabilities and quick-start code examples\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003e- CircuitPython is easier to code but not as low-level and complete as Arduino.\u003c\/p\u003e\n\u003cp\u003eHere are some of the updates you can look forward to when using Trinket M0:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSame size, form-factor, and pinout as classic Trinket\u003c\/li\u003e\n\u003cli\u003eUpdating ATtiny85 8-bit AVR for ATSAMD21E18 32-bit Cortex M0+\u003c\/li\u003e\n\u003cli\u003e256KB Flash - 32x as much as 8 KB on ATtiny85\u003c\/li\u003e\n\u003cli\u003e32 KB RAM - 64x as much as 512 bytes on ATtiny85\u003c\/li\u003e\n\u003cli\u003e48 MHz 32 bit processor - 6x as fast as ATtiny85 (not even taking into account 32-bit speedups)\u003c\/li\u003e\n\u003cli\u003eNative USB supported by every OS - can be used in Arduino or CircuitPython as USB serial console, Keyboard\/Mouse HID, even a little disk drive for storing Python scripts. (ATtiny85 does not have native USB)\u003c\/li\u003e\n\u003cli\u003eCan be used with Arduino IDE or CircuitPython\u003c\/li\u003e\n\u003cli\u003eBuilt in green ON LED\u003c\/li\u003e\n\u003cli\u003eBuilt in red pin #13 LED\u003c\/li\u003e\n\u003cli\u003eBuilt in RGB DotStar LED\u003c\/li\u003e\n\u003cli\u003eAll 5 GPIO pins are available and are not shared with USB - so you can use them for whatever you like!\n\u003cul\u003e\n\u003cli\u003eFive GPIO pins with digital input\/output with internally connected pullups or pulldowns\u003c\/li\u003e\n\u003cli\u003eThree of the I\/O pins can be used for 12-bit analog input\u003c\/li\u003e\n\u003cli\u003eTrue analog output on one I\/O pin - can be used to play 10-bit quality audio clips\u003c\/li\u003e\n\u003cli\u003eWe gave the M0 pads the exact same names as the original Trinket so all your existing Arduino code will work exactly the same as-is without changes\u003c\/li\u003e\n\u003cli\u003eTwo high speed PWM outputs - for servos, LEDs, etc\u003c\/li\u003e\n\u003cli\u003eThree pins can also be used as hardware capacitive touch sensors with no additional components required\u003c\/li\u003e\n\u003cli\u003eCan drive NeoPixels or DotStars on any pins, with enough memory to drive 8000+ pixels. \u003ca href=\"https:\/\/learn.adafruit.com\/dma-driven-neopixels\"\u003eDMA-NeoPixel support on one pin \u003c\/a\u003eso you can drive pixels without having to spend any processor time on it.\u003c\/li\u003e\n\u003cli\u003eNative hardware SPI, I2C and Serial available on two pads so you can connect to any I2C or Serial device with true hardware support (no annoying bit-banging). You can have either one SPI device or both I2C and Serial.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eSame Reset switch for starting your project code over\u003c\/li\u003e\n\u003cli\u003ePower with either USB or external output (such as a battery) - it'll automatically switch over\u003c\/li\u003e\n\u003cli\u003eMounting holes! Yeah!\u003c\/li\u003e\n\u003cli\u003eReally really small\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eEach order comes with one fully assembled and tested Trinket M0 with CircuitPython \u0026amp; example code programmed in.\u003c\/p\u003e\n\u003cp\u003eSo what are you waiting for? Pick up a Trinket M0 today and be amazed at how easy and fast it is to get started with Trinket and CircuitPython!\u003c\/p\u003e","brand":"Adafruit","offers":[{"title":"Default Title","offer_id":32902029738116,"sku":"ADA-TRINKETM0","price":14.65,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0368\/0337\/9332\/products\/3500-00.jpg?v=1584963597"},{"product_id":"kitronik-bumper-add-on-for-the-move-mini","title":"Kitronik Bumper Add-On For The :MOVE MINI","description":"\u003cmeta charset=\"utf-8\"\u003e\n\u003cp\u003e\u003cstrong\u003eWith this Bumper add-on for \u003ca href=\"https:\/\/smalldevices.com.au\/collections\/robotics\/products\/kitronik-move-mini-buggy-kit-for-bbc-micro-bit\"\u003e:MOVE mini for the BBC microbit\u003c\/a\u003e, everyone's favourite little programmable robot buggy just got much better. If you were looking for an add-on that allows for competative games, then this is the add-on for you.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003ePreviously on :MOVE mini, we; drew shapes, controlled it via bluetooth, controlled it with a second\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/smalldevices.com.au\/collections\/micro-bit-starters\/products\/micro-bit\"\u003emicrobit\u003c\/a\u003e, and we also coded a variety of light shows. Now, it can totally used to play ball games too!\u003c\/p\u003e\n\u003cp\u003eThis self assembly Bumper add-on kit is made from the same materials as :MOVE mini and has been designed in keeping with the :MOVE mini aesthetic.\u003c\/p\u003e\n\u003cp\u003eOnce the add-on has been attached to :MOVE mini, the buggy can now easily be used for competative games involving a ball or a puck, football and hockey spring to mind.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThis kit requires mechanical assembly.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThis attachment can be fitted quickly and easily.\u003c\/li\u003e\n\u003cli\u003e:MOVE mini will be able to move balls and pucks.\u003c\/li\u003e\n\u003cli\u003eAllows for competative team games such as football and hockey.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eContents:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e1 x Set of Bumper parts.\u003c\/li\u003e\n\u003cli\u003e2 x\u003cspan\u003e \u003c\/span\u003e10mm Counter sunk M3 screw.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eDimensions:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eLength: 32mm.\u003c\/li\u003e\n\u003cli\u003eWidth: 77mm.\u003c\/li\u003e\n\u003cli\u003eHeight: 9mm.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eRequires:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e1 x\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/smalldevices.com.au\/collections\/robotics\/products\/kitronik-move-mini-buggy-kit-for-bbc-micro-bit\"\u003e:MOVE mini for the BBC microbit kit\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003e1 x\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/smalldevices.com.au\/collections\/micro-bit-starters\/products\/micro-bit\"\u003eBBC microbit\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003eScrewdriver.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eResources:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/www.kitronik.co.uk\/blog\/kitronik-custom-makecode-editor-servo-blocks\/\"\u003eGuide For Kitronik Custom MakeCode Editor Servo Blocks\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/www.kitronik.co.uk\/blog\/getting-started-servolite-board-microbit\/\"\u003eGetting Started With The Servo:Lite board\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/www.kitronik.co.uk\/blog\/3-servos-with-the-servolite-board\/\"\u003eGuide For Controlling 3 Servos With The Servo:Lite board\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/www.kitronik.co.uk\/blog\/using-kitronik-zip-leds-bbc-microbit\/\"\u003eGuide For Using Kitronik ZIP LEDs With The BBC microbit\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/www.kitronik.co.uk\/blog\/move-mini-microbit-radio\/\"\u003eGuide for Controlling :MOVE mini With The microbit Radio\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/www.kitronik.co.uk\/blog\/adding-bluetooth-remote-control-move-mini\/\"\u003eGuide For Adding Bluetooth Remote Control To :MOVE mini\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/www.kitronik.co.uk\/blog\/drawing-move-mini-buggy\/\"\u003eGuide For Drawing With The :MOVE mini For The microbit\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/www.kitronik.co.uk\/blog\/automatic-headlights-for-move-mini\/\"\u003eGuide For Coding Automatic Headlights For :MOVE mini\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/www.kitronik.co.uk\/blog\/coding-indicators-on-the-move-mini\/\"\u003eGuide For Coding Indicators For :MOVE mini\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca title=\"WS2812B Datasheet\" href=\"https:\/\/www.kitronik.co.uk\/pdf\/WS2812B-LED-datasheet.pdf\"\u003eWS2812B Datasheet\u003c\/a\u003e.\u003cimg src=\"https:\/\/www.kitronik.co.uk\/pdf\/pdf_icon.gif\" alt=\"pdf_icon.gif\" width=\"25\" height=\"24\"\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003ca title=\"servo:lite Datasheet\" href=\"https:\/\/www.kitronik.co.uk\/pdf\/5623-servo-lite-datasheet.pdf\"\u003eServo:Lite board Datasheet\u003c\/a\u003e.\u003cimg src=\"https:\/\/www.kitronik.co.uk\/pdf\/pdf_icon.gif\" alt=\"pdf_icon.gif\" width=\"25\" height=\"24\"\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003ca title=\"Build Instructions\" href=\"https:\/\/www.kitronik.co.uk\/pdf\/5624-BD-bulldozer-move-mini-add-on-build-instructions.pdf\"\u003eBuild Instructions\u003c\/a\u003e.\u003cimg src=\"https:\/\/www.kitronik.co.uk\/pdf\/pdf_icon.gif\" alt=\"pdf_icon.gif\" width=\"25\" height=\"24\"\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Kitronik Ltd","offers":[{"title":"Default Title","offer_id":32902037897348,"sku":"KT-MOVEBUMP","price":3.65,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0368\/0337\/9332\/products\/5624-bm_large-bumper-move-mini.jpg?v=1584963621"},{"product_id":"kitronik-bulldozer-add-on-for-the-move-mini","title":"Kitronik Bulldozer Add-On For The :MOVE MINI","description":"\u003cmeta charset=\"utf-8\"\u003e\n\u003cp\u003e\u003cstrong\u003eWith this Bulldozer add-on for \u003ca href=\"https:\/\/smalldevices.com.au\/collections\/robotics\/products\/kitronik-move-mini-buggy-kit-for-bbc-micro-bit\"\u003e:MOVE mini for the BBC microbit\u003c\/a\u003e, everyone's favourite little programmable robot buggy just got much better. Robots often do more than just :MOVE from A to B, and with this add-on so can :MOVE mini.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNOTE: This add-on is only for the :MOVE mini MK1 - you can \u003ca href=\"https:\/\/smalldevices.com.au\/products\/bulldozer-add-on-for-move-mini-mk2\" title=\"Kitronik Bulldozer add-on for the :MOVE mini bugger Mk2 in Australia from Smalldevices\"\u003efind the new MK2 here.\u003c\/a\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003ePreviously on :MOVE mini, we; drew shapes, controlled it via bluetooth, controlled it with a second\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/smalldevices.com.au\/collections\/micro-bit-starters\/products\/micro-bit\"\u003emicrobit\u003c\/a\u003e, and we also coded a variety of light shows. Now, it can totally lift and carry stuff too!\u003c\/p\u003e\n\u003cp\u003eThis self assembly bulldozer add-on kit is made from the same materials as :MOVE mini, designed in keeping with the :MOVE mini aesthetic, and also comes with the servo required to move the bulldozer add-on up and down.\u003c\/p\u003e\n\u003cp\u003eThere is a very simple\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/smalldevices.com.au\/collections\/micro-bit-accessories\/products\/kitronik-servo-lite-board-for-the-bbc-micro-bit\"\u003eServo:Lite\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003eboard hack that enables the control of the third servo, you can\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/www.kitronik.co.uk\/blog\/3-servos-with-the-servolite-board\/\"\u003efind out how here\u003c\/a\u003e. Once the kit is fully assembled, the bulldozer arm can be coded with the Microsoft\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/www.kitronik.co.uk\/blog\/getting-started-microsoft-makecode-editor\/\"\u003eMakeCode Editor\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThis kit requires mechanical assembly, and a tiny bit of soldering.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eWhen attached to :MOVE mini this kit offers a fun introduction to the world of DIY robotics.\u003c\/li\u003e\n\u003cli\u003eCode it with the Microsoft\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/makecode.microbit.org\/\"\u003eMakeCode Editor\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003eUse in conjunction with an App and control it over Bluetooth.\u003c\/li\u003e\n\u003cli\u003eUse the radio function and a second microbit as a controller.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eContents:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e1 x Set of Buldozer parts.\u003c\/li\u003e\n\u003cli\u003e1 x\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/smalldevices.com.au\/collections\/robotics\/products\/fs90r-360-degree-continuous-rotation-servo\"\u003eContinous rotation tervo\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003e4 x\u003cspan\u003e \u003c\/span\u003eM2 6mm Pan head steel screw.\u003c\/li\u003e\n\u003cli\u003e4 x\u003cspan\u003e \u003c\/span\u003eM2 Hex Full width nut.\u003c\/li\u003e\n\u003cli\u003e2 x\u003cspan\u003e \u003c\/span\u003eCounter sunk M3 screw.\u003c\/li\u003e\n\u003cli\u003e1 x 3 Pin header\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eDimensions:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eLength: 110mm.\u003c\/li\u003e\n\u003cli\u003eWidth: 50mm.\u003c\/li\u003e\n\u003cli\u003eHeight: 75mm.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eRequires:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e1 x\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/smalldevices.com.au\/collections\/robotics\/products\/kitronik-move-mini-buggy-kit-for-bbc-micro-bit\"\u003e:MOVE mini for the BBC microbit kit\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003e1 x\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/smalldevices.com.au\/collections\/micro-bit-starters\/products\/micro-bit\"\u003eBBC microbit\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003eScrewdriver.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eResources:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/www.kitronik.co.uk\/blog\/kitronik-custom-makecode-editor-servo-blocks\/\"\u003eGuide For Kitronik Custom MakeCode Editor Servo Blocks\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/www.kitronik.co.uk\/blog\/getting-started-servolite-board-microbit\/\"\u003eGetting Started With The Servo:Lite board\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/www.kitronik.co.uk\/blog\/3-servos-with-the-servolite-board\/\"\u003eGuide For Controlling 3 Servos With The Servo:Lite board\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/www.kitronik.co.uk\/blog\/move-mini-microbit-radio\/\"\u003eGuide for Controlling :MOVE mini With The microbit Radio\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/www.kitronik.co.uk\/blog\/adding-bluetooth-remote-control-move-mini\/\"\u003eGuide For Adding Bluetooth Remote Control To :MOVE mini\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca title=\"WS2812B Datasheet\" href=\"https:\/\/www.kitronik.co.uk\/pdf\/WS2812B-LED-datasheet.pdf\"\u003eWS2812B Datasheet\u003c\/a\u003e.\u003cimg src=\"https:\/\/www.kitronik.co.uk\/pdf\/pdf_icon.gif\" alt=\"pdf_icon.gif\" width=\"25\" height=\"24\"\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003ca title=\"servo:lite Datasheet\" href=\"https:\/\/www.kitronik.co.uk\/pdf\/5623-servo-lite-datasheet.pdf\"\u003eServo:Lite board Datasheet\u003c\/a\u003e.\u003cimg src=\"https:\/\/www.kitronik.co.uk\/pdf\/pdf_icon.gif\" alt=\"pdf_icon.gif\" width=\"25\" height=\"24\"\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003ca title=\"5624 BD bulldozer move mini add on build instructions\" href=\"https:\/\/www.kitronik.co.uk\/pdf\/5624-BD-bulldozer-move-mini-add-on-build-instructions.pdf\"\u003eBuild Instructions\u003c\/a\u003e.\u003cimg src=\"https:\/\/www.kitronik.co.uk\/pdf\/pdf_icon.gif\" alt=\"pdf_icon.gif\" width=\"25\" height=\"24\"\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Kitronik Ltd","offers":[{"title":"Default Title","offer_id":32902039535748,"sku":"KT-MOVEBD","price":16.25,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0368\/0337\/9332\/products\/5624-bd_large-bulldozer-move-mini-microbit.jpg?v=1584963626"},{"product_id":"bme680-breakout-air-quality-temperature-pressure-humidity-sensor","title":"BME680 Breakout - Air Quality, Temperature, Pressure, Humidity Sensor","description":"\u003cmeta charset=\"utf-8\"\u003e\n\u003cp\u003e\u003cstrong\u003eThe state-of-the-art BME680 breakout lets you measure temperature, pressure, humidity, and indoor air quality, and is Raspberry Pi and Arduino-compatible!\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eUse this breakout to monitor every aspect of your indoor environment. Its gas resistance readings will react to changes in volatile organic compounds and can be combined with humidity readings to give a measure of indoor air quality.\u003c\/p\u003e\n\u003cp\u003eWant to get an idea of whether there's adequate ventilation in your bedroom, your workshop, or workplace? Set up a BME680 on a Pi Zero W and have it log sensor readings to a file, or stream live data to a web service like\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/io.adafruit.com\/\"\u003eadafruit.io\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003eor\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"http:\/\/freeboard.io\/\"\u003efreeboard.io\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eBosch\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/www.bosch-sensortec.com\/bst\/products\/all_products\/bme680\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eBME680\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003etemperature, pressure, humidity, air quality sensor\u003c\/li\u003e\n\u003cli\u003eI2C interface, with address select via ADDR solder bridge (0x76 or 0x77)\u003c\/li\u003e\n\u003cli\u003e3.3V or 5V compatible\u003c\/li\u003e\n\u003cli\u003eRaspberry Pi-compatible pinout (pins 1, 3, 5, 7, 9)\u003c\/li\u003e\n\u003cli\u003eCompatible with Raspberry Pi 3, 2, B+, A+, Zero, and Zero W\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/github.com\/pimoroni\/bme680\"\u003ePython library\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/ae-bst.resource.bosch.com\/media\/_tech\/media\/datasheets\/BST-BME680-DS001-00.pdf\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eDatasheet\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eKit includes\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eBME680 breakout\u003c\/li\u003e\n\u003cli\u003e1x5 male header\u003c\/li\u003e\n\u003cli\u003e1x5 female right angle header\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eWe've designed this breakout board so that you can solder on the piece of right angle female header and pop it straight onto the bottom left 5 pins on your Raspberry Pi's GPIO header (pins 1, 3, 5, 6, 9). The right angle header also has the advantage of positioning the breakout away from the Pi's CPU so as to minimise radiated heat.\u003c\/p\u003e\n\u003ch2\u003eSoftware\u003c\/h2\u003e\n\u003cp\u003eAs well as the\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/github.com\/BoschSensortec\/BME680_driver\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eC library provided by Bosch\u003c\/a\u003e, we've put together a\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/github.com\/pimoroni\/bme680\"\u003ePython library\u003c\/a\u003e (with a quick and painless one-line-installer) to use with your BME680, making it straightforward to combine it with our other boards (why not use a Blinkt! or Unicorn pHAT to visualise air quality in real time?)\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eOur software does not support Raspbian Wheezy.\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch2\u003eNotes\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eIn our testing, we've found that the sensor requires some burn-in time (at least 20 minutes) and that readings may take a couple of minutes to stabilise after beginning measurements\u003c\/li\u003e\n\u003cli\u003eThe solder pads (marked ADDR) can be bridged to change the I2C address from the default of 0x76 to 0x77, meaning that you can use up to two sensors on the same Raspberry Pi or Arduino\u003c\/li\u003e\n\u003cli\u003eDimensions: 26x15.5x3mm (LxWxH)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Pimoroni","offers":[{"title":"Default Title","offer_id":32902049661060,"sku":"PM-BME680","price":32.65,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0368\/0337\/9332\/products\/bme680-arduino-1_1024x1024_1f755611-1d68-4614-a86f-bb033f3bae8c.jpg?v=1584963668"},{"product_id":"adafruit-amg8833-ir-thermal-camera-featherwing","title":"Adafruit AMG8833 IR Thermal Camera FeatherWing","description":"\u003cmeta charset=\"utf-8\"\u003e\n\u003cp style=\"display: inline !important;\"\u003eA Feather board without ambition is a Feather board without FeatherWings! This is the \u003cstrong\u003eThermal Camera FeatherWing\u003c\/strong\u003e: thanks to the Panasonic AMG8833 8x8 GridEYE sensor, it adds heat-vision to \u003cem\u003eany\u003c\/em\u003e Feather main board. Using our Feather Stacking Headers or \u003ca href=\"https:\/\/smalldevices.com.au\/products\/short-feather-headers-kit-12-pin-and-16-pin-female-header-set\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eFeather Female Headers\u003c\/a\u003e you can connect a FeatherWing on top of your Feather board and let the board take flight!\u003c\/p\u003e\n\u003cp\u003eThis sensor from Panasonic is an 8x8 array of IR thermal sensors. When connected to your Feather it will return an array of 64 individual infrared temperature readings over I2C. It's like those fancy thermal cameras, but compact and simple enough for easy integration.\u003c\/p\u003e\n\u003cp\u003eThis part will measure temperatures ranging from \u003cstrong\u003e0°C to 80°C (32°F to 176°F) \u003c\/strong\u003ewith an accuracy of +- 2.5°C (4.5°F). It can detect a human from a distance of up to 7 meters (23) feet. With a maximum frame rate of 10Hz, It's perfect for creating your own human detector or mini thermal camera. We have an easy-to use Arduino and CircuitPython code so you can get started fast. The sensor communicates over I2C. If you have a fast Feather like the ESP8266, ESP32 or Teensy, you can interpolate the 8x8 grid and get some pretty nice results! (The video above shows a peace-sign finger  demo using a Teensy Feather and 24x24 interpolation)\u003c\/p\u003e\n\u003cdiv class=\"row-fluid build-text\"\u003e\n\u003cp\u003eThe AMG8833 is the next generation of 8x8 thermal IR sensors from Panasonic, and offers higher performance than it's predecessor the AMG8831. The sensor only supports I2C, and has a configurable interrupt pin that can fire when any individual pixel goes above or below a threshold that you set.\u003c\/p\u003e\n\u003cp\u003ePair this up with our \u003ca href=\"https:\/\/smalldevices.com.au\/collections\/adafruit\/products\/adafruit-tft-featherwing-2-4-320x240-touchscreen-for-all-feathers\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eTFT FeatherWing\u003c\/a\u003e and some stackin' headers to make the snazzy Thermal Camera demo shown above - Feather and TFT Wing not included.\u003c\/p\u003e\n\u003cdiv\u003e\n\u003cdiv class=\"fluid-width-video-wrapper\"\u003e\u003ciframe src=\"https:\/\/www.youtube.com\/embed\/ydZOjOzUivA?start=285\" frameborder=\"0\" allowfullscreen=\"true\" class=\"youtube\" id=\"fitvid415968\" data-ss1510641236=\"1\"\u003e\u003c\/iframe\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch3\u003eTechnical Details:\u003c\/h3\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/learn.adafruit.com\/adafruit-amg8833-8x8-thermal-camera-sensor\"\u003e\u003cstrong\u003eCheck our our detailed guide for wiring diagrams, datasheets, schematics, libraries, code, Fritzing objects, etc!\u003c\/strong\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cul id=\"prod-info\"\u003e\n\u003cli\u003eProduct Dimensions: 50.0mm x 23.0mm x 6.1mm \/ 2.0\" x 0.9\" x 0.2\"\u003c\/li\u003e\n\u003cli\u003eProduct Weight: 4.7g \/ 0.2oz\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Adafruit","offers":[{"title":"Default Title","offer_id":32902069813380,"sku":"ADA-3622","price":62.3,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0368\/0337\/9332\/products\/3622-00.jpg?v=1584963756"},{"product_id":"adafruit-amg8833-ir-thermal-camera-breakout","title":"Adafruit AMG8833 IR Thermal Camera Breakout","description":"\u003cmeta charset=\"utf-8\"\u003e\n\u003cp\u003e\u003cstrong\u003eAdd heat-vision to your project and with an Adafruit AMG8833 Grid-EYE Breakout! This sensor from Panasonic is an 8x8 array of IR thermal sensors. When connected to your microcontroller (or raspberry Pi) it will return an array of 64 individual infrared temperature readings over I2C. It's like those fancy thermal cameras, but compact and simple enough for easy integration.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis part will measure temperatures ranging from\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003e0°C to 80°C (32°F to 176°F) \u003c\/strong\u003ewith an accuracy of +- 2.5°C (4.5°F). It can detect a human from a distance of up to 7 meters (23) feet. With a maximum frame rate of 10Hz, It's perfect for creating your own human detector or mini thermal camera. We have code for using this breakout on an Arduino or compatible (the sensor communicates over I2C) or on a Raspberry Pi with Python. On the Pi, with a bit of image processing help from the SciPy python library we were able to interpolate the 8x8 grid and get some pretty nice results!\u003c\/p\u003e\n\u003cdiv class=\"row-fluid build-text\"\u003e\n\u003cp\u003eThe AMG8833 is the next generation of 8x8 thermal IR sensors from Panasonic, and offers higher performance than it's predecessor the AMG8831. The sensor only supports I2C, and has a configurable interrupt pin that can fire when any individual pixel goes above or below a threshold that you set.\u003c\/p\u003e\n\u003cp\u003eTo make it easy to use, we pick \u0026amp; placed it on a breakout board with a 3.3V regulator and level shifting. So you can use it with any 3V or 5V microcontroller or computer.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/learn.adafruit.com\/adafruit-amg8833-8x8-thermal-camera-sensor\"\u003eEven better - We've done all the hard work here, with example code and supporting software libraries to get you up in running in just a few lines of code! Check out our guide for how to get started\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Adafruit","offers":[{"title":"Default Title","offer_id":32902071419012,"sku":"ADA-AMG8833IRCAM","price":62.35,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0368\/0337\/9332\/products\/3538-01.jpg?v=1584963763"},{"product_id":"adafruit-gemma-m0-miniature-wearable-electronic-platform","title":"Adafruit GEMMA M0 - Miniature wearable electronic platform","description":"\u003cmeta charset=\"utf-8\"\u003e\n\u003cp\u003eThe\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eAdafruit Gemma M0\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eis a super small microcontroller board, with just enough built-in to create many simple projects. It may look small and cute: round, about the size of a quarter, with friendly alligator-clip sew pads. But do not be fooled! The Gemma M0 is incredibly powerful! We've taken the same form factor we used for the original ATtiny85-based Gemma and gave it an upgrade. The Gemma M0 has swapped out the lightweight ATtiny85 for a ATSAMD21E18 powerhouse.\u003c\/p\u003e\n\u003cp\u003eThe Gemma M0 will super-charge your wearables! It's just as small, and it's easier to use, so you can do more.\u003c\/p\u003e\n\u003cp\u003eThe most exciting part of the Gemma M0 is that while you can use it with the Arduino IDE, we are shipping it with CircuitPython on board. When you plug it in, it will show up as a very small disk drive with \u003cstrong\u003emain.py\u003c\/strong\u003e on it. Edit \u003cstrong\u003emain.py\u003c\/strong\u003e with your favorite text editor to build your project using Python, the most popular programming language. No installs, IDE or compiler needed, so you can use it on any computer, even ChromeBooks or computers you can't install software on. When you're done, unplug the Gemma M0 and your code will go with you.\u003c\/p\u003e\n\u003cp\u003eHere are some of the updates you can look forward to when using Gemma M0:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSame size, form-factor, and pinout as classic Gemma\u003c\/li\u003e\n\u003cli\u003eUpdating ATtiny85 8-bit AVR for ATSAMD21E18 32-bit Cortex M0+\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e256KB Flash\u003c\/strong\u003e - 8x as much as 8 KB on ATtiny85\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e32 KB RAM\u003c\/strong\u003e - 64x as much as 512 bytes on ATtiny85\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e48 MHz 32 bit processor\u003c\/strong\u003e - 6x as fast as ATtiny85 (not even taking into account 32-bit speedups)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNative USB supported by every OS\u003c\/strong\u003e - can be used in Arduino or CircuitPython as USB serial console, Keyboard\/Mouse HID, even a little disk drive for storing Python scripts. (ATtiny85 does not have native USB)\u003c\/li\u003e\n\u003cli\u003eCan be used with \u003cstrong\u003eArduino IDE\u003c\/strong\u003e or \u003cstrong\u003eCircuitPython\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eBuilt in RGB DotStar LED\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThree big-hole sew-pads\u003c\/strong\u003e can be used for conductive thread or alligator-clips for fast prototyping\n\u003cul\u003e\n\u003cli\u003eEach I\/O pad can be used for \u003cstrong\u003e12-bit analog input\u003c\/strong\u003e, or \u003cstrong\u003edigital input\/output \u003c\/strong\u003ewith internally connected pullups or pulldowns\u003c\/li\u003e\n\u003cli\u003eWe gave the M0 pads the exact same names as the original Gemma so all your existing Arduino code will work exactly the same as-is without changes\u003c\/li\u003e\n\u003cli\u003eTrue \u003cstrong\u003eanalog output\u003c\/strong\u003e on one I\/O pad - can be used to play 10-bit quality audio clips\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTwo\u003c\/strong\u003e \u003cstrong\u003ehigh speed PWM\u003c\/strong\u003e outputs on other two I\/O Pads - for servos, LEDs, etc\u003c\/li\u003e\n\u003cli\u003eAll three pads can also be used as \u003cstrong\u003ehardware capacitive touch sensors\u003c\/strong\u003e with no additional components required\u003c\/li\u003e\n\u003cli\u003eCan drive \u003cstrong\u003eNeoPixels or DotStars on any pins, with enough memory to drive 8000+ pixels\u003c\/strong\u003e. \u003ca href=\"https:\/\/learn.adafruit.com\/dma-driven-neopixels\"\u003eDMA-NeoPixel support on one pin \u003c\/a\u003eso you can drive pixels without having to spend any processor time on it.\u003c\/li\u003e\n\u003cli\u003eNative hardware I2C or Serial available on two pads so you can connect to any I2C or Serial device with true hardware support (no annoying bit-banging)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eSame \u003cstrong\u003eReset switch\u003c\/strong\u003e for starting your project code over\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOn\/Off switch\u003c\/strong\u003e built in\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eJST battery connector\u003c\/strong\u003e for plugging in AAA's or LiPoly battery (no built-in LiPoly charging so it is safe to use with NiMH\/Alkalines)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eEach order comes with one fully assembled and tested Gemma M0 with CircuitPython \u0026amp; example code programmed in.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSo what are you waiting for? Pick up a Gemma M0 today and be amazed at how easy and fast it is to get started with Gemma and CircuitPython!\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/learn.adafruit.com\/adafruit-gemma-m0\/overview\"\u003eFor more information about Adafruit Gemma M0, check our out Learn guide\u003c\/a\u003e.\u003c\/p\u003e","brand":"Adafruit","offers":[{"title":"Default Title","offer_id":32902072205444,"sku":"ADA-GEMMAM0","price":15.55,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0368\/0337\/9332\/products\/3501-00.jpg?v=1584963768"},{"product_id":"wheel-for-fs90r-60mm-x-8mm","title":"Wheel for FS90R Servo 60mm x 8mm","description":"\u003cmeta charset=\"utf-8\"\u003e\n\u003cp\u003eThese wheels are specifically designed for use with FS90R micro continuous rotation servo and also fit the\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/smalldevices.com.au\/collections\/parts\/products\/fs90r-360-degree-continuous-rotation-servo\"\u003eMini 360 degree continuous rotation servo\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eThe wheel presses onto the servo spline just like a typical servo horn, and the small screw included with the FS90R accessory pack for mounting servo horns should be used to hold the wheel in place.\u003c\/p\u003e\n\u003cp\u003eThe wheels have silicone press fit tyres and measure 60mm in diameter.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSilicone press fit tyres.\u003c\/li\u003e\n\u003cli\u003eIdeal for use with a\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/smalldevices.com.au\/collections\/parts\/products\/fs90r-360-degree-continuous-rotation-servo\"\u003eMini 360 degree continous rotation servo\u003c\/a\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eContents:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e1 x Black Wheel for FS90R Micro Servo, 608mm.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eDimensions:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDiameter: 60mm.\u003c\/li\u003e\n\u003cli\u003eTyre Width: 8mm.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Feetech","offers":[{"title":"Default Title","offer_id":32902075383940,"sku":"KT-60x8WHEEL","price":4.5,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0368\/0337\/9332\/products\/2574_large-black-wheel-for-fs90r-micro-servo-60mm-8mm.jpg?v=1584963784"},{"product_id":"pimoroni-explorer-hat-pro","title":"Pimoroni Explorer HAT Pro","description":"\u003cmeta charset=\"utf-8\"\u003e\n\u003carticle class=\"description\" notranslate=\"\"\u003e\n\u003cp\u003e\u003cstrong\u003eExplorer HAT Pro adds a lot of useful tools to your Raspberry Pi.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIt has digital inputs and outputs, capacitive touch pads, croc. clip compatible pads, coloured LEDs, analog inputs, motor drivers, and a mini breadboard for prototyping your projects\u003c\/p\u003e\n\u003cp\u003eGreat for little robots, games, science experiments, exploring small electronic circuits, and interacting with you Pi.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFour buffered 5V tolerant inputs (perfect for Arduino compatibility)\u003c\/li\u003e\n\u003cli\u003eFour powered 5V outputs (up to 500mA total across all four channels)\u003c\/li\u003e\n\u003cli\u003eFour capacitive touch pads (labelled 1, 2, 3, 4)\u003c\/li\u003e\n\u003cli\u003eFour capacitive crocodile clip pads (labelled 5, 6, 7, 8)\u003c\/li\u003e\n\u003cli\u003eFour coloured LEDs (red, green, blue, and yellow)\u003c\/li\u003e\n\u003cli\u003eFour analog inputs\u003c\/li\u003e\n\u003cli\u003eTwo H-bridge motor drivers (up to 200mA per channel; soft PWM control)\u003c\/li\u003e\n\u003cli\u003eA heap of useful (unprotected) 3v3 goodies from the GPIO\u003c\/li\u003e\n\u003cli\u003eA mini breadboard on top!\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/pinout.xyz\/pinout\/explorer_hat_pro\"\u003eExplorer HAT Pro pinout\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003eCompatible with Raspberry Pi 3, 2, B+, A+, Zero, and \u003ca href=\"https:\/\/smalldevices.com.au\/collections\/raspberry-pi\/products\/raspberry-pi-zero-w\"\u003eZero W\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/github.com\/pimoroni\/explorer-hat\"\u003ePython library\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003eComes fully assembled\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSoftware\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eWe've made it super-quick to get to grips with Explorer HAT Pro with our\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/github.com\/pimoroni\/explorer-hat\"\u003ePython library\u003c\/a\u003e, including a bunch of examples to show off all of Explorer HAT Pro's functions.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNotes\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThe inputs use a 5-channel buffer that will accept anything from 2V-5V as logic high\u003c\/li\u003e\n\u003cli\u003eMini breadboard had 170 points, 17x5 per half of the breadboard\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/article\u003e\n\u003cdiv class=\"learn-content\" id=\"learn_content\" data-product=\"explorer-hat\" notranslate=\"\"\u003e\n\u003ch2 class=\"title\"\u003e\u003cspan\u003eTUTORIALS \u0026amp; PROJECTS\u003c\/span\u003e\u003c\/h2\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003carticle\u003e\n\u003cdiv\u003e\u003ca href=\"http:\/\/learn.pimoroni.com\/tutorial\/sandyj\/explorer-hat-pro-pin-entry-system\"\u003eExplorer HAT Pro PIN entry system\u003c\/a\u003e\u003c\/div\u003e\n\u003cp\u003eLearn how to use Explorer HAT Pro to build your own PIN entry system\u003c\/p\u003e\n\u003cspan\u003eBeginner \/ Explorer HAT\u003c\/span\u003e\u003c\/article\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003carticle\u003e\n\u003cdiv\u003e\u003ca href=\"http:\/\/learn.pimoroni.com\/tutorial\/tanya\/halloween-explorer-hat-eyes\"\u003eHalloween Explorer HAT Eyes\u003c\/a\u003e\u003c\/div\u003e\n\u003cp\u003eHow to use an Explorer HAT to make squishy keys\u003c\/p\u003e\n\u003cspan\u003eBeginner \/ Kids\u003c\/span\u003e\u003c\/article\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003carticle\u003e\n\u003cdiv\u003e\u003ca href=\"http:\/\/learn.pimoroni.com\/tutorial\/explorer-hat\/making-a-minecraft-thermometer\"\u003eMaking a Minecraft Thermometer\u003c\/a\u003e\u003c\/div\u003e\n\u003cp\u003eLearn how to use Explorer HAT Pro and an Analog temperature sensor to make a thermometer in Minecraft\u003c\/p\u003e\n\u003cspan\u003eIntermediate \/ Explorer HAT\u003c\/span\u003e\u003c\/article\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003carticle\u003e\n\u003cdiv\u003e\u003ca href=\"http:\/\/learn.pimoroni.com\/tutorial\/sandyj\/explorer-hat-pro-lights-out-game\"\u003eExplorer HAT Pro Lights Out Game\u003c\/a\u003e\u003c\/div\u003e\n\u003cp\u003eLearn how to create a fun little version of the Lights Out game using Explorer HAT Pro\u003c\/p\u003e\n\u003cspan\u003eBeginner \/ Explorer HAT\u003c\/span\u003e\u003c\/article\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003carticle\u003e\n\u003cdiv\u003e\u003ca href=\"http:\/\/learn.pimoroni.com\/tutorial\/robots\/controlling-your-robot-wireless-keyboard\"\u003eControlling Your Robot: USB HID\/Wireless Keyboards\u003c\/a\u003e\u003c\/div\u003e\n\u003cp\u003eThis article walks you through controlling a Pi-powered Robot with a USB HID Keyboard or similar USB input device.\u003c\/p\u003e\n\u003cspan\u003eIntermediate \/ Raspberry Pi\u003c\/span\u003e\u003c\/article\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003carticle\u003e\n\u003cdiv\u003e\u003ca href=\"http:\/\/learn.pimoroni.com\/tutorial\/sandyj\/explorer-hat-pro-shift-register\"\u003eExplorer HAT pro 8-bit shift register\u003c\/a\u003e\u003c\/div\u003e\n\u003cp\u003eLearn how to control LEDs with Explorer HAT Pro and an 8-bit shift register\u003c\/p\u003e\n\u003cspan\u003eAdvanced \/ Explorer HAT\u003c\/span\u003e\u003c\/article\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"Pimoroni","offers":[{"title":"Default Title","offer_id":32902078529668,"sku":"PM-EXPHATPRO","price":34.6,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0368\/0337\/9332\/products\/Explorer_HAT_Pro_1_of_2_1024x1024_89d6e537-c8ab-4cab-82da-dc3a151cad1a.jpg?v=1584963799"},{"product_id":"ultrasonic-distance-sensor-for-bit-bot","title":"Ultrasonic Distance Sensor for Bit:Bot","description":"\u003cmeta charset=\"utf-8\"\u003e\u003cspan\u003e\u003cstrong\u003eUltrasonic Distance Sensor for Bit:Bot\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eReady-Soldered, just attach to your Bit:Bot with the screws provided and off you go.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eUse Microsoft PXT (or MicroPython) to read the distance to an obstacle, then program your Bit:Bot to avoid it.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eBoth Ping and Echo signals are on the same pin (Pin 15)\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eThis accessory is available in 2 flavours:\u003c\/span\u003e\n\u003col\u003e\n\u003cli\u003eWith the ultrasonic sensor soldered directly to the PCB\u003c\/li\u003e\n\u003cli\u003eWith a socket soldered on the PCB that you can plug the sensor into\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003eThe sensor soldered into the PCB is much more robust and reliable, but has a big drawback in that you cannot access the micro-USB connector on the micro:bit unless you either remove the micro:bit or use a\u003cspan\u003e \u003c\/span\u003eright-angled micro USB adapter.\u003c\/p\u003e\n\u003cp\u003eConsider using the\u003cspan\u003e \u003c\/span\u003eright-angled USB adapter with this option\u003cbr\u003e\u003cbr\u003e\u003cem\u003eThe socketed version allows most USB leads to access the micro:bit, \u003cstrong\u003ebut it isn't as robust.\u003c\/strong\u003e\u003c\/em\u003e\u003c\/p\u003e\n\u003cmeta charset=\"utf-8\"\u003e\n\u003cp\u003e\u003cstrong\u003eNote: \u003c\/strong\u003eBit:Bot not included\u003c\/p\u003e","brand":"4Tronix","offers":[{"title":"Socketed","offer_id":32902090981508,"sku":"4T-USONICSCK","price":7.1,"currency_code":"EUR","in_stock":true},{"title":"Soldered","offer_id":32902091014276,"sku":"4T-USONICSOL","price":7.1,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0368\/0337\/9332\/products\/bitson01_1024x1024_17e5e6c0-a2ff-4ac8-a51a-4e914360b021.jpg?v=1584963851"}],"url":"https:\/\/roboticles.myshopify.com\/collections\/robotics.oembed?page=4","provider":"roboticles","version":"1.0","type":"link"}