{"product_id":"adafruit-pro-trinket-5v","title":"Adafruit Pro Trinket - 5v","description":"\u003cmeta charset=\"utf-8\"\u003e\n\u003carticle class=\"description\" notranslate=\"\"\u003e\n\u003cp\u003e\u003cstrong\u003eTrinket's got a big sister in town - the Pro Trinket!\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003ePro Trinket combines everything you love about Trinket with the familiarity of the core Arduino chip, the ATmega328. It's like an Arduino Pro Mini with more pins and USB tossed in.\u003c\/p\u003e\n\u003cp\u003eTrinket's a year old now, and while its been great to see tons of tiny projects, sometimes you just need more pins, more FLASH, and more RAM. That's why Adafruit designed Pro Trinket, with 18 GPIO, 2 extra analog inputs, 28K of flash, and 2K of RAM.\u003c\/p\u003e\n\u003cp\u003eLike the Trinket, it has onboard USB bootloading support - Adafruit opted for a MicroUSB jack this time. Adafruit also added Optiboot support, so you can either program your Pro Trinket over USB or with a FTDI cable just like the Pro Mini and friends.\u003c\/p\u003e\n\u003cp\u003eThe Pro Trinket PCB measures only 1.5\" x 0.7\" x 0.2\" (without headers) but packs the same capability as an Arduino UNO. So it's great once you've finished up a prototype on an official Arduino UNO and want to make the project smaller.\u003c\/p\u003e\n\u003cp\u003eThe Pro Trinket uses the Atmega328P chip, which is the same core chip in the Arduino UNO\/Duemilanove\/Mini\/etc. However, while the 5V version runs at the same speed and voltage, the 3V version\u003cstrong\u003e uses 3V logic and 12MHz clock \u003c\/strong\u003ewhich means it's good when you want a lower-power and lower-voltage setup. Pro Trinket is programmable using the Arduino IDE as you already set up, and 95% of Arduino projects will work out of the box!\u003c\/p\u003e\n\u003cp\u003eBoth the 3v and 5v Pro Trinkets ship with header pins, so there's no need for you to buy any extras (unless of course you want some extra header pins).\u003c\/p\u003e\n\u003cp\u003eFor tons more details, check out the \u003ca href=\"https:\/\/learn.adafruit.com\/introducting-pro-trinket\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eIntroducing Pro Trinket tutorial\u003c\/a\u003e or the \u003ca href=\"http:\/\/adafruit.com\/datasheets\/ATMEGA328P.pdf\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eDatasheet\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eHere's some things you may have to consider when adapting Arduino sketches:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePins #2 and #7 are not available (they are exclusively for USB)\u003c\/li\u003e\n\u003cli\u003eThe Pro Trinket 3V runs at 12MHz, this doesn't affect most projects. Only the most timing-specific libraries may be affected, check the documentation! The NeoPixel Library works fine at 12MHz.\u003c\/li\u003e\n\u003cli\u003eThe onboard power supply is a 3.3V\/5V regulator and it can provide 150mA output\u003c\/li\u003e\n\u003cli\u003eYou cannot plug shields directly into the Pro Trinket\u003c\/li\u003e\n\u003cli\u003eThere is no Serial-to-USB chip onboard. This is to keep the Pro Trinket small and inexpensive, you can use any FTDI cable to connect to the FTDI port for a Serial connection. The USB connection is for uploading new code only.\u003c\/li\u003e\n\u003cli\u003eThe bootloader on the Pro Trinket use 4KB of FLASH so the maximum sketch size is 28,672 bytes. The bootloader does not affect RAM usage.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eHere's some handy specifications:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eATmega328P onboad chip in QFN package\u003c\/li\u003e\n\u003cli\u003e12MHz clock rate for 3V version and 16MHz clock rate for the 5V, 28K FLASH available\u003c\/li\u003e\n\u003cli\u003eUSB bootloader with a nice LED indicator looks just like a USBtinyISP so you can program it with AVRdude and\/or the Arduino IDE (with a few simple config modifications).\u003c\/li\u003e\n\u003cli\u003eAlso has headers for an FTDI port for reprogramming\u003c\/li\u003e\n\u003cli\u003eMicro-USB jack for power and\/or USB uploading, you can put it in a box or tape it up and use any USB cable for when you want to reprogram.\u003c\/li\u003e\n\u003cli\u003eOn-board 3.3V\/5V power regulator with 150mA output capability and ultra-low dropout. Up to 16V input, reverse-polarity protection, thermal and current-limit protection.\u003c\/li\u003e\n\u003cli\u003ePower with either USB or external output (such as a battery) - it'll automatically switch over\u003c\/li\u003e\n\u003cli\u003eOn-board green power LED and red pin #13 LED\u003c\/li\u003e\n\u003cli\u003eReset button for entering the bootloader or restarting the program.\u003c\/li\u003e\n\u003cli\u003eWorks with 99% of existing Arduino sketches (anything that doesn't use more than 28K, and doesn't require pins #2 and #7)\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eMounting holes! Yeah!\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cb\u003e\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/WBtAqU1uRP8\" frameborder=\"0\" allowfullscreen=\"\" data-ss1486902029=\"1\"\u003e\u003c\/iframe\u003e \u003cbr\u003e\u003c\/b\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003c\/article\u003e\n\u003cdiv class=\"reviews\"\u003e\u003c\/div\u003e","brand":"Adafruit","offers":[{"title":"Default Title","offer_id":32902288113796,"sku":"PM-ADA-PROTRINKET5V","price":13.45,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0368\/0337\/9332\/products\/2000_1024x1024_5ba14f65-e8b8-48a9-8f15-54e99e0bef47.jpg?v=1584964570","url":"https:\/\/roboticles.myshopify.com\/products\/adafruit-pro-trinket-5v","provider":"roboticles","version":"1.0","type":"link"}